Shielded D-Sub-9 cables for powering and interfacing flux gate DCCTs Important Points. 1. Both shields are securely screwed to the metal housing. Technical info Part number: 141110000X 2 Cable structure Outer diameter 1. 3912400013 - D-SUB-9 Full Metal Hood - Encitech DTSL09-RG-LJS-T-NM 2. 3912400012 - D Sub Connector Housing, 9 Ways, D Sub TE 205203-3 Farnell 1345230 3. 3952300006 - D Sub Contact, HDP-20 Series Connectors, Socket, TE 66504-9 Farnell 593230 4. 3922300002 - D Sub Connector Housing, Tin & Dimple, 9 Ways, D Sub, TE 205204-4 Farnell 1345138 5. 3952300005 - D Sub Contact, HDP-20 Series Connectors, Contacts, TE 66506-9 Farnell 593217 6. 3932200005 - xx mm 5 x 2 x 0.5 mm + screen, Cable (Helukabel 17004 - PAAR-TRONIC-CY 5x2x0,5) 7. 4101000079 - 2 x Wire Ferrule Terminal, 16 AWG 8. 4101000121 - 2 x 10 mm Heat shrink sleeve; 3:1; 3mm; black Wire cross section Minimum bending radius Connector shell material Contact plating 5 x diameterAll measures in mm APPR Malervej 10, DK-2630 Taastrup Danisense.com D-SUB Cable for DSSIU6 Document number 9311300016 REV. Resistance values are given at 20 °C. All information subject to change without notice All wires single except on pin 4 which has two parallel wires. Part number nn Tin plated steelMaterial: Treatment: nn 27-11-18 NEW cable and new Crimp DSUB 10-07-19 Released for outsourcing 19-08-19 Partlist update. 13-11-19 Partlist update. 15-07-20 New type 3m.