• Compact 19” rack mount 1U height • Current transducers’ output signals available via 4mm banana plugs (Only current output) • Front LEDs indication of normal operation for each transducer and power LED for DSSIU-4-1U • Universal autorange (100-240V AC 50/60Hz) AC input voltage or 120-370V DC input voltage. Precision - Innovation www.danisense.com

Each channel does have 3 connectors. • Transducer (DSUB9) for connection to the transducer • RED + (4mm Banana) is positive output from the measured current • BLACK - (4mm Banana) is negative output from the measured current The DSSIU-4-1U will send the measured current to the RED and BLACK 4mm banana jacks. RED being connected to pin 6 on the transducer. BLACK being connected to pin 1 on the transducer. Precision - Innovation www.danisense.com

Precision - Innovation www.danisense.com

The DSSIU-4-1U is designed to work with Danisense transducers with DSUB9 connection powered by +/-15V. 1. Do not power up the device before all cables are connected. 2. Only use cable provided by Danisense to ensure correct wiring and dimension of cable. 3. Ensure that it is easy to unplug the mains cord in case of system problems. 4. Place the primary conductor through the apperture of the transducer(s) 5. If the DSSIU-4-1U is intended for desk use, mount the rubber feet which are part of the package. 6. If the DSSIU-4-1U is intended for Rack mounting, use the screw kit for mounting and do not...

Danisense A/S Malervej 10 DK-2630 Taastrup Denmark Declares that under our sole responsibility that this product is in conformity with the provisions of the following EC Directives, including all amendments, and with national legislation implementing these directives: Directive 2014/30/EU Directive 2014/35/EU And that the following harmonized standards have been applied EN 61010-1 (Third Edition):2010, EN 61010-1:2010/A1:2019 EN 61010-2-030:2021/A11:2021 EN 61326-1:2013 All DANISENSE products are manufactured in accordance with RoHS directive 2011/65/EU. Annex II of the RoHS directive was amended...