Complete 1-channel system interface unit for ultra-stable, high precision fluxgate technology current transducers Features • 1 channel through D-sub-connector • Universal mains input • Measurement read out through 4mm banana connector • Power and status LEDs on front • Fluxgate DCCTs • Hall effect DCCTs • Power measurement • Electric vehicle (EV) test bench • Power measurement and power analysis • Particle accelerators • Current calibration purposes • Precision current sensing Low noise power supply and interface unit with industry standard D-sub-9 connector for interfacing a range of DC current transducers (DCCTs). With current read out through banana connectors it makes precision current measurement easy and convenient. Housed in a compact metal case and powered by universal mains, the DSSIU-1 is a reliable and complete solution for implementation of fluxgate current sensing technology. All information subject to change without notice

A To ensure safety protection, only use the device as described by the manufacturer The DSSIU-1 is designed to power current transducers such as Danisense DT, DS, DQ, DN and DM series or similar. Please see the product manual: https://danisense.com/user-manual. • Cleaning only with a damp cloth • Power/unpower the device by plugging/unplugging the mains power cord • Always keep mains power cord accessible • (Front) D-sub-9 connector for connecting the transducer cable with the DSSIU-1 • (Front) RED 4 mm banana connector for connecting the positive (+) current or voltage reading from the transducer...

6 2. Place the primary conductor through the aperture of the transducer. 3. Connect a D-sub-9 cable between DSSIU-1 and sensor. 104 4. Connect a low impedance amperemeter, measuring resistor or power analyzer on the output (4mm red and black connectors). 5. If using a transducer with direct measuremnent output from the transducer housing (DS600UB-10V or similar), AVOID connecting to the black and red bananas on the front of the DSSIU-1. 6. When all connection are secured - connect mains power. 7. Apply primary current. LEDs The two front panel LEDs indicate 1) the DSSIU-1 is powered. 2) the status...

NOTICE OF PROPRIETARY RIGHTS THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION. IT MAY NOT BE REPRODUCED OR TRANSFERRED TO DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR MANUFACTURING OR ANYOTHER PURPOSE WITHOUT PRIOR WRITTEN PERMISSION. THE BELOW APPLIES UNLESS OTHERWISE STATED SURFACE ROUGHNESS INSPECTION DIMENSIONS ARE MARKED WITH: NO BURRS NOR SHARP EDGES DESCRIPTION All information subject to change without notice PART/ASSEMBLYTHE NUMBER BELOW REV. OTHERWISE STATED APPLIES UNLESS INSPECTION DIMENSIONS RELEASED ARE MARKED WITH: NO BURRS NOR SHARP EDGES DESCRIPTION DIMENSION VENDOR

Declaration of Conformity Danisense A/S Malervej 10 DK-2630 Taastrup Dato: 15. November 2012 Declares that under our sole responsibility that this product is in conformity with the provisions of the following EC Directives, including all amendments, and with national legislation implementing these directives: Directive 2014/30/EU Directive 2014/35/EU And that the following harmonized standards have been applied EEN 61010-1 (Third Edition):2010, EN 61010-1:2010/A1:2019 EN 61010-2-030:2021/A11:2021 EN 61326-1:2013 All DANISENSE products are manufactured in accordance with RoHS directive 2011/65/EU....