*mydirectindustry

DC200IF

Product catalog summary

Overview: The DC200IF is a high-performance current transducer designed for precise DC and AC current measurement applications up to 300A. It utilizes fluxgate, closed-loop compensated technology for enhanced accuracy and stability.

Features:

Linearity error maximum of 6 ppm.
Offset maximum of 5 ppm, equivalent to 1.5mA.
Industry-standard 6.3 x 0.8mm faston connection.
DC and AC current metering with +/-0.1% absolute accuracy up to 5kHz.

Applications: Suitable for gradient amplifiers for MRI devices, precision power supplies, battery testing, and variable speed motor drives.

Specifications:

Nominal primary AC current: 200 Arms.
Nominal primary DC current: 300 A.
Operating temperature range: -40°C to +70°C.
Power supply voltages: ±14.25V to ±15.75V.

Electrical Specifications:

Overload capacity: ±1500 A for 100ms.
Bandwidth: 300 kHz for small signals.
Phase shift varies from 0.06º to 2.0º depending on frequency range.
Noise levels measured in ppm across different frequency ranges.

Environmental and Mechanical Characteristics:

Operating temperature range: -40°C to 70°C.
Storage temperature range: -40°C to 85°C.
Relative humidity: 20% to 80% non-condensing.
Mass: 0.200 kg.

Standards: Complies with EN 61326-1 for EMC and EN 61010-1:2010 for safety.

Isolation Specifications:

Clearance: 9 mm.
Creepage distance: 10 mm.
Impulse withstand voltage: 10.4 kV.
Rated rms isolation voltage: 300V to 600V.

Mounting Instructions: The transducer can be mounted using base plate or side mounting with specified hole dimensions.

Cautions:

Respect connection polarities to prevent destruction of the transducer.
Ensure adequate current and voltage rating of power supplies to avoid saturation.

Catalog excerpts

dani/enseHighly stabilized and precise fluxgate technology based current transducer, reengineered for cost sensitive, non-intrusive, isolated DC and AC current measurement applications up to 300A Features Gradient amplifiers for MRI devices Precision power supplies, drives Batteries testing and evaluation systems Variable speed motor drives Linearity error maximum 6 ppm Offset maximum 5ppm—equivalent to 1.5mA Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for enhanced accuracy and stability Industry standard 6.3 x 0.8mm faston connection Cost focused high performance transducer DC and AC current metering with +/-0.1% absolute accuracy up to 5kHz Precision - Innovation www.danisense.com

Open the catalog to page 1

dani/enseElectrical specifications at Ta=23°C, supply voltage = ± 15V unless otherwise stated Parameter Precision - Innovation www.danisense.com

Open the catalog to page 2

dani/ense Isolation specifications Precision - Innovation www.danisense.com

Open the catalog to page 3

Gain / Phase - Typical 5 (general tolerance 0.3mm unless PLEASE ENSURE ADEQUATE CURRENT AND VOLTAGE RATING OF POWER SUPPLES TO AVOID SATURATION PLEASE IMPERATIVELY RESPECT CONNECTION POLARITIES TO PREVENT DESTRUCTION OF THE TRANSDUCER Positive current direction Is identified by an arrow on the transducer label Mounting instructions • • Base plate mounting Side mounting Precision – Innovation www.danisense.com

Open the catalog to page 4

DC200IF

DC200IF

Catalog excerpts

All Danisense catalogs and technical brochures