MPT-250C Wire Pull Tester
7Pages

MPT-250C Wire Crimp Pull Tester The MPT-250C is a Motorized Tensile Wire Crimp Pull Tester used to test a crimp contact’s or terminal’s tensile strength. The unit has a range of 2.5 lbf to 250 lbf and a full color LCD touchscreen interface. Includes data capture capability for exporting test data to a PC via USB or RS-232. The MPT-250C meets UL, ISO, SAE, MIL, and ASTM tensile test requirements. Standard Accessories • 2 Test Types: “Pull to Fail” and “Force Hold” • Self-Tightening Cam-Type (Contact) Grip (P/N 15-3202C) • Data Capture (measures continuous and peak force values) • Heavy-Duty Swivel Lockdown Upper Grip (P/N 15-3046) • Compact / High Stability Profile • Custom Fit, Foam Lined, Hard Shell Shipping / Travel Case • Intuitive Full Color Touchscreen LCD User Interface Optional Accessories • Easy Setup, Operation, and Grip Change • Force Measurement Range: 2.5 – 250.0 lbf (113kgf or 1112.0N) • Force Measurement Resolution: 0.1 (lbf, kgf, N) • Ring Terminal Grip (P/N 15-0066C) • Miniature Contacts Grip (P/N 15-3314) • Slotted Terminal Grip (P/N 15-3087C) • Force Measurement Accuracy: +/- 0.5% Full Scale • Customized Grips are available for specific applications • Safe Force Overload: 150% of Full Scale • Pull Rate Speeds: 1 to 10 inches per minute (inch / min) • Pull Rate / Speed Accuracy: 1-5 +/- 0.125 inch/min, 6-10 +/- 0.250 inch/min • Accomodates Most 10 AWG - 26 AWG Wire • Communication Ports: Serial RS-232 (DB9 female connector), USB 2.0 • Power Requirements: IEC Connector, 100 – 240VAC, 50/60Hz, 25 Watts maximum • External Fuse Type and Rating: Type 3AG (6.3 X 32mm) 1A time delay, 250VAC © Copyright 2017 Daniels Manufacturing Corporation • Weight 23.64 lbs (less options) • Shipping Weight ≈ 40.6 lbs (with typical / standard grips) • Case Weight 16.12 lbs • Base Dimensions: 13.3” Wide x 6” High x 11” Deep Calibration • New units are supplied with a “Certificate of Calibration” • Fa

MINIMUM TENSILE STRENGTH REQUIREMENT* CONDUCTOR SIZE AWG (REFERENCE) UL 486A TEST VALUES (COMMERCIAL STANDARD) *Consult DMC for specific information on tensile strength standards. MPT-250C STANDARD AND OPTIONAL GRIPS Standard Contact Grip Heavy-Duty Swivel Optional Self-aligning Hole Guides Terminal Lugs, Machined Contacts Lockdown Upper Grip Standard Wire Pull Grip Safe-T-Cable Pull and Grip Set Optional Contact Grip Optional Contact Grip Optional Contact Grip Ring Terminals Terminal Lugs, Machined Contacts Post Grip Slotted Wheel Grip © Copyright 2017 Daniels Manufacturing Corporation...

HPT-200 PORTABLE TENSILE TESTER Tensile Testing Breaks Out Of The Lab... Alphatron, by DMC, introduces a new portable tensile tester capable of pull testing wire crimps up to 200 pounds (and size 10 AWG in most cases). The Alphatron HPT-200 is a complete system, contained in a protective carrying case with contoured pockets for the meter case, the hand-held test fixture, and the international battery charger. It is only natural that the company, which is known throughout the world for quality wire termination tools and equipment would add the very best portable tensile tester to meet your...

HPT-200 PORTABLE TENSILE TESTER HPT-200 STANDARD GRIPS 15-3035 Slotted Disc Grip 15-3039 Hex Terminal Upper Grip 15-3114 RF Coax Terminal Upper Grip 15-3115 Lower Grip for RF Coax Cables Minimum Tensile Strength Requirements Wire Size (AWG) DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA PHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: dmc@dmctools.com COPYRIGHT © 2012 Daniels Manufacturing Corp. ALL RIGHTS RESERVED

PT-150H WIRE CRIMP PULL TESTER Now available from DMC is the PT-150H Electronic Manual Tensile Test System which may be used in conjunction with SPC Programs or other Quality Control disciplines in both OEM and maintenance applications. The electronic digital readout display is a fast and reliable source of test data. The operation of the equipment is simple yet versatile, and DMC will customize the gripping jaws or other components to make test sample installation and removal an easy task. STANDARD FEATURES • Capacity: 150 lb, 667 N, 68 Kg • Display units factory set for pounds, newtons or...

PT-150H WIRE CRIMP PULL TESTER Minimum Tensile Strength Requirements Self-Tightening Wire Grip 15-3087 Slotted Terminal Grip 15-3202 PT-150H OPTIONAL GRIPS Self-Tightening Lower Grip Standard Miniature Lower Grip Ring Terminal Lower Grip Locking Ring Terminal Lower Grip Miniature Terminal Lower Grip Flag Terminal Lower Grip Custom Grips Available. Consult DMC for details. DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA PHONE (407) 855-6161 • FAX (407) 855-6884 • www.DMCTools.com • E-MAIL: DMC@DMCTools.com COPYRIGHT © 2015 Daniels Manufacturing Corp. ALL RIGHTS RESERVED

PT-40XP Small Gage Wire Crimp Pull Tester STANDARD FEATURES • Capacity: 40 lb, 170 N • Display units factory set for pounds or newtons • Resolution: 0.1 lb / 0.1 N • Accuracy: ± 0.5 % of full scale • Digital Display with Peak Hold • Backlit LCD Display with 0.56” High Digits • Self-Tightening Wedge-Grip and Cam-Grip Assemblies • Simple Screw Pull Mechanism POWER SPECS • Built-in NIMH Battery, With Charger • 14 Hours of Use on a Single Charge • Power Management Circuit allows use during charging Now available from DMC, the portable PT-40XP Electronic Manual Tensile Test System is specially...