MAKING MODERN LIVING POSSIBLE VLT® drives for 690 V now available down to smallest power sizes Danfoss makes 690 V installations most cost efficient. The high performance frequency converters now cover the complete 690 V power range from 1.4 MW down to 1.1 kW. Danfoss presents the smallest 690V enclosure on the market below 7.5 kW and extends the power range of its enclosure sizes. motors down to 0.37 kW without expensive over-dimensioned drives or step down transformers. Built on the powerful and reliable VLT® platform, the drives offer system designers, machine builders, and end users the efficiency enhancing bene- fits offered by Danfoss' single drive concept for industrial applications. (isolated) grids, the IP 20 protected drives are especially useful in installa- tions within chemical, mining, water/ wastewater and marine applications. Danfoss extends the power range of its IP 20 drives up to 75 kW with 4 new enclosure sizes less cabinet space required Especially for power sizes below 7.5 kW, Danfoss offers a remarkable space reduction in comparison to other solutions. Dedicated enclosure sizes down to 1.1 kW Operate motors down to 0.37 kW Smallest size and required space Side-by-side mounting without derating Integrated harmonic filters (<40%THDi) Integrated EMC filter (A1/EN 55011) with up to 150 m screened motor cable Class 3C3 conformal coating (IEC60721-3-3) Full performance at 50° C ambient temperature Danfoss output filters Complete range of 690 V drives up to 1.4 MW No need for large over-dimensioned drive No need for step-down transformer Cost for cabinet and installation room reduced Saves valuable panel space Maintain mains quality without external filters Provide reliable operation of the installation without additional external filters Increase lifetime and reliability in harsh Secure operation without derating/ Matching sinusoidial or du/dt filters One drive series covers all your systems needs Facts about our products

VLT® Automation Drive frequency configured with additional safety functions through special options and ATEX-certified thermistor input option MCB 112 can be used to monitor both Ex d and Ex e motors. It is certified demand applications to protect motors option can be used as the sole protec- tive device of an explosion-proof motor operated by a frequency converter. Universal residual current monitoring The RCMB20/35 external fault current monitoring module reliably detects insulation faults in drives systems operating on IT orTN mains. In addition to usual protection against sudden insulation...