Catalogs >
Danfoss VLT Drives >
VLT® DriveMotor FCM 106

VLT® DriveMotor FCM 106
2Pages

Catalog excerpts

Fact Sheet This enables the FCM 106 to reduce both installation costs and complexity significantly. The compact design of the motor mounted drive solution also eliminates the need for cabinets. Due to the fact that the drive is mounted directly on the motor, long motor cables are eliminated, reducing costs further for both OEMs and end users. A plug connects the drive to the motor making assembly/disassembly fast and service friendly. Easy to install and delivered with either permanent magnet or standard induction motor mounted. With a wide range of standard, integrated pump and fan features, the VLT® DriveMotor FCM 106 is a highly dedicated, space saving motor and control solution in the 0.55-7.5 kW range. The drive is delivered from the factory attached to either a standard induction motor or a size optimized permanent magnet motor. efficiency. The VLT® DriveMotor FCM 106 complies with both IE3 and IE4 (fprEN 60034-30-1) efficiency requirements. The DriveMotor is part of Danfoss EC+ concept, which maximizes the advantages and efficiency of permanent magnet motors, variable speed drives and plugfan technologies. Alphanumerical display, 7 languages External connection for display as standard Motor data pre-programmed IP 54/UL type 3R PCB protection class 3C3 Vibration fulllling LVD requirements 110% overload (0.55 – 7.5 kW) Eective commissioning Fast connectivity No programming needed Reliable in wet and dirty environments Reliable in corrosive environments Suitable for all motor-mounted challenges Optimised for fans and pumps High starting torque by one step up in power size Free choice of motor technology Save energy and extend lifetime Saves an additional 5 – 15% energy Reduces cost and saves energy Protects the pump and extends the lifetime No external PI controller required Often makes PLC/ DDC unnecessary Reduce eort in PLC Product range Asynchronous or permanent magnet motor Sleep mode Automatic Energy Optimizer function AHU dedicated functions Pump dedicated functions Built-in PI controller Smart Logic Controller Control signal for mechanical brake FC Protocol, Modbus, Metasys, BACnet, integrated Integrated DC link Integrated EMC lters Flexible connectivity Meets EN 61000-6-12, small power cable Meets EN 61800-3, (C1 and C2), and EN 55011 Class (B and A1)

Open the catalog to page 1

VLT® Control Panel LCP 31 commissioning and status indication during operation. Connection easy accessible through cable gland. VLT® Control Panel LCP 31 ncludes 3m cable, panel mounting bracket, gasket and fastners. Panel for start/stop and setting the Potentiometer for cable gland For setting the reference directly at the VLT® Motion Control Tool Ideal for commissioning and servicing the drive with motor attached. Programmable relay outputs Choose the FCM 106 with a standard induction motor or permanent magnet motor Danfoss can accept no responsibility for possible errors in catalogues,...

Open the catalog to page 2