Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together with the broad range of coils means that EV210A covers a broad variety of industrial applications. • For water, steam, oil, compressed air, aggressive liquids and gases • Differential pressure: 0 – 30 bar • Media temperature from -30 – 120 °C • Ambient temperature: Up to 50 °C • Coil enclosure: Up to IP65 • Thread connections: G 1⁄8 and G 1⁄4 • DN 1.2 – 3.5 • Viscosity: Up to 20 cSt • EV210A NC and NO versions in brass for neutral media • EV210A NC stainless steel version for neutral and aggressive liquids a

Brass valve body, NO Technical data, brass valve body, NC and NO Differential pressure min. to max. [bar] Connection ISO228/1 Seal material Orifice size Kv - value [m3/h] Coil voltage Suitable coil type, AM Media temperature, min. to max. [°C] Code number Time to open and close

Data sheet | Solenoid valves, type EV210A Dimensions and weight, brass NC

Data sheet | Solenoid valves, type EV210A Mounting angle Below coils can be used with EV210A For further information and for ordering, see separate data sheet for coils.

Accessories: Cable plug Application Seal material The spare parts set contains: Armature tube Armature with valve plate and spring Flange Disk 2 O-rings Nut 2 screws for connecting tube to valve body

Data sheet | Solenoid valves, type EV210A Function NC Coil voltage disconnected (closed): When the voltage is disconnected, the armature (2) with the valve plate (3) is pressed down against the valve orifice (4) by the closing spring (1) and the medium’s pressure. The valve will be closed for as long as the voltage to the coil is disconnected. Coil voltage connected (open): When voltage is applied to the coil (5), the armature (2) with the valve plate (3) is lifted clear of the valve orifice (4). The valve is now open for unimpeded flow and will be open for as long as there is voltage to the...

Capacity diagrams: EV210A NC Example, water at higher pressure: Capacity for EV210A 2.5B at differential pressure of 0.5 bar. Approx. 0.12 m3/h EV210A NO Example, water at higher pressure: Capacity for EV210A 2.5B NO at differential pressure of 0.5 bar. Approx. 0.11s m3/h Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfbss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications...