Data Sheet Solenoid coil Type BB, BE, BF, BG and BN The Clip-on coils are available for the entire range of Danfoss solenoid valves The coils are specially designed to operate in the aggressive environment of high humidity and temperature fluctuations that you find in most refrigeration systems. The Clip-on fastening system ensures a faultless installation and makes the coils easy to mount and dismount. A Danfoss Clip-on coil can be mounted without any tools at all, and it is simple to dismount the coil by means of a screwdriver. The Clip-on coils are available for the entire range of Danfoss solenoid valves for refrigeration, freezing and air conditioning purposes. Features • Encapsulated coils with long operating life, even under extreme conditions. • Standard coils for AC or DC. • Standard coils available with 3-core cable, terminal box or DIN plugs. • Standard coils from 12 V to 420 V, 50, 60 or 50/60 Hz. • Standard coils dimensioned for max. opening differential pressure (MOPD) of up to 38 bar. • Coils can be fitted without the use of tools.

Solenoid coil, Type BB, BE, BF, BG, and BN Product specification Technical data Table 1: Solenoid coil type Solenoid coil type 1m 3-core cable Data Polution degree Rated impulse voltage [kV], if altitude < 4000 m Safety classification Max. altitude above sea level [m] For DIN plug, impulse withstand voltage is 3.1 kV for 2000 m < Altitude < 4000 m Connection 3-core cable The external thread in the screwed cable entry suits flexible steel hose or corresponding cable protection (3 x 0.75 mm2). Terminal box Leads are connected to terminal screws in the terminal box. The box is fitted with a Pg 13.5...

Solenoid coil, Type BB, BE, BF, BG, and BN Dimension and weight Figure 1: Terminal box 10 W , Weight 0.29 Kg Figure 2: Cable 10 W , Weight 0.29 Kg Figure 3: DIN socket 10 W , Weight 0.24 Kg Figure 4: Terminal box 12 - 20 W , Weight 0.55 Kg © Danfoss | Climate Solutions | 2021.08

Solenoid coil, Type BB, BE, BF, BG, and BN Ordering Figure 5: BF solenoid coil with 1m 3-core cable IP67 Table 2: Ordering for BF solenoid coil with 1m 3-core cable IP67 Type EVR 2 – EVR 40 (NC) EVR 6 – EVR 22 (NO) EVRH 10 – EVR 40 EVRC EVRA EVRAT EVRS / EVRST EVM (NC) Voltage variation Power consumption Valve type Figure 6: BE solenoid coil with terminal box IP67 © Danfoss | Climate Solutions | 2021.08

Solenoid coil, Type BB, BE, BF, BG, and BN Table 3: Ordering for BE solenoid coil with terminal box IP67 Power consumption Voltage variation Valve type EVR 2 – EVR 40 (NC) EVR 6 – EVR 22 (NO) EVRH 10 – EVRH 40 EVRC EVRA EVRAT EVRS / EVRST EVM (NC) See „Opening differential pressure“ under „Technical data“ for the valve concerned. When replacing a coil with terminal box, it is sufficient to change the coil unit itself. Therefore, order coil with DIN plugs and protective cap. Figure 7: BG solenoid coil with terminal box IP67 Table 4: Ordering for BG solenoid coil with terminal box IP67 Tambient...

Solenoid coil, Type BB, BE, BF, BG, and BN Voltage variation EVR 2 – 8 EVR 25 – 40 EVRA 3 – EVRA 15 (NC) EVRA 25 – EVRA 40 (NC) EVRAT 10 – EVRAT 15 (NC) EVRS/EVRST 3 – EVRS/EVRST 15 EVM (NC/NO) Valve type Power consumption Code no. See „Opening differential pressure“ under „Technical data“ for the valve concerned. When replacing a coil with terminal box, it is sufficient to change the coil unit itself. Therefore, order coil with DIN plugs and protective cap. Figure 8: BE solenoid coil with DIN spade and protection cap IP20 Table 5: Ordering for BE solenoid coil with DIN spade and protection cap...

Solenoid coil, Type BB, BE, BF, BG, and BN Figure 9: BB solenoid coil with DIN spade*) Table 6: Ordering for BB solenoid coil with DIN spade*) Type BB024AS BB115AS BB230AS BB240AS BB024BS BB110CS BB230CS Valve type EVR 2 – EVR 40 (NC) EVR 6 – EVR 22 (NO) EVRH 10 – EVRH 40 EVRC EVRA EVRAT EVRS/EVRST EVM (NC) Power consumption Voltage varia‐ tion *) Can only be used with DIN plug  NOTE: See „Opening differential pressure“ under „Technical data“ for the valve concerned. When replacing a coil with terminal box, it is sufficient to change the coil unit itself. Therefore, order coil with DIN plugs...

Solenoid coil, Type BB, BE, BF, BG, and BN (1) Recommended use for EVRH with high MOPD (38 bar). Figure 11: Coil with DIN plug Table 8: Ordering for Coil with DIN plug Type With built-in light emitting indicator diode for solenoid valves © Danfoss | Climate Solutions | 2021.08

Solenoid coil, Type BB, BE, BF, BG, and BN Certificates and declaration The list contains all certificates, declarations, and approvals for this product type. Individual code number may have some or all of these approvals, and certain local approvals may not appear on the list. Some approvals may change over time. You can check the most current status at danfoss.com or contact your local Danfoss representative if you have any questions. Table 9: Certificates, declarations, and approvals Document name Document type Document topic Approval authority Marine - Safety Certificate © Danfoss | Climate...

Online support Danfoss offers a wide range of support along with our products, including digital product information, software, mobile apps, and expert guidance. See the possibilities below. The Danfoss Product Store The Danfoss Product Store is your one-stop shop for everything product related—no matter where you are in the world or what area of the cooling industry you work in. Get quick access to essential information like product specs, code numbers, technical documentation, certifications, accessories, and more. Start browsing at store.danfoss.com. Find technical documentation Find the technical...