Catalog excerpts
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together with the broad range of coils means that EV210A covers a broad variety of industrial applications. • For water, steam, oil, compressed air, aggressive liquids and gases • Differential pressure: 0 – 30 bar • Media temperature from -30 – 120 °C • Ambient temperature: Up to 50 °C • Coil enclosure: Up to IP65 • Thread connections: G 1⁄8 and G 1⁄4 • DN 1.2 – 3.5 • Viscosity: Up to 20 cSt • EV210A NC and NO versions in brass for neutral media • EV210A NC stainless steel version for neutral and aggressive liquids a
Open the catalog to page 1Brass valve body, NO Technical data, brass valve body, NC and NO Differential pressure min. to max. [bar] Connection ISO228/1 Seal material Orifice size Kv - value [m3/h] Coil voltage Suitable coil type, AM Media temperature, min. to max. [°C] Code number Time to open and close
Open the catalog to page 3Data sheet | Solenoid valves, type EV210A Dimensions and weight, brass NC
Open the catalog to page 6Data sheet | Solenoid valves, type EV210A Mounting angle Below coils can be used with EV210A For further information and for ordering, see separate data sheet for coils.
Open the catalog to page 7Accessories: Cable plug Application Seal material The spare parts set contains: Armature tube Armature with valve plate and spring Flange Disk 2 O-rings Nut 2 screws for connecting tube to valve body
Open the catalog to page 8Data sheet | Solenoid valves, type EV210A Function NC Coil voltage disconnected (closed): When the voltage is disconnected, the armature (2) with the valve plate (3) is pressed down against the valve orifice (4) by the closing spring (1) and the medium’s pressure. The valve will be closed for as long as the voltage to the coil is disconnected. Coil voltage connected (open): When voltage is applied to the coil (5), the armature (2) with the valve plate (3) is lifted clear of the valve orifice (4). The valve is now open for unimpeded flow and will be open for as long as there is voltage to...
Open the catalog to page 9Capacity diagrams: EV210A NC Example, water at higher pressure: Capacity for EV210A 2.5B at differential pressure of 0.5 bar. Approx. 0.12 m3/h EV210A NO Example, water at higher pressure: Capacity for EV210A 2.5B NO at differential pressure of 0.5 bar. Approx. 0.11s m3/h Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfbss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in...
Open the catalog to page 10All Danfoss Industrial Automation catalogs and technical brochures
-
Pressure switch Type RT
21 Pages
-
Solenoid valve Type EV310A
11 Pages
-
Pressure switch RT
17 Pages
-
MBC 5000 and MBC 5100
6 Pages
-
Wind Power
8 Pages
-
Pressure switch Type BCP
7 Pages
-
Danfoss Link™
14 Pages
-
Thermostatic Radiator Valve,
12 Pages
-
Optyma™ High Ambient 52 Pack
22 Pages
-
Electric Heating
40 Pages
-
Hydronic Specialties
48 Pages
-
Optyma™ Semi-Hermetic
22 Pages
-
Optyma™
60 Pages
-
Supermarkets
28 Pages
-
Hydronic Balancing & Control
12 Pages
-
HGM-PGM Gas detector
4 Pages
-
Danfoss Bond Buff er P3
2 Pages
-
Automotive Power Modules
4 Pages
-
Danfoss Product catalogue
68 Pages
-
AK-PC 772Mini-booster
2 Pages
-
Danfoss Service Thermostats
2 Pages
-
Clean Grid Solutions
44 Pages
-
Industrial sensors and switches
12 Pages
-
Marine applications
12 Pages
-
Mobile Hydraulic applications
12 Pages
-
Temperature sensors overview
2 Pages
-
Switches overview
2 Pages
-
Fluid controls overview
5 Pages
-
How to use - Solenoid valves
46 Pages
-
Core Products Catalogue
171 Pages