MORSØ - EHXL Dust free operation Miter Machine No compressor needed Exact 45° degree cut Fully automatic, electric/hydraulic Dust free operation - No compressor needed MORSØ-EHXL is a fully automatic, electric/ hydraulic miter machine with a dual hand release. This makes the machine completely safe as it is impossible to operate the machine and touch the knives at the same time. It cuts all kinds of wood, plastic, MDF and plywood. With MORSØ-EHXL you achieve a clean, smooth cut by automatically cutting the workpiece in minimum two cuts. The cutting time varies from 1 second and up, depending on the thickness of the workpiece. Having finished the cutting, the knife block automatically returns to the starting position. Noise level below 70dB workpiece is 150mm/6”). From 100mm and up, the MORSØ-EHXL will automatically cut the workpiece bit by bit. The adjustment is made by a handle on the front of the MORSØ-EHXL. The vertical movement of the knife block is also adjustable with three different heights, depending on the thickness of the workpiece (small, medium or large). These adjustments allow the MORSØ-EHXL to give you a clean and more constantly accurate cut. Morsø-EHXL is CE approved. The starting position (horizontal movement) is adjustable up to 100mm/4” (Maximum width of DANLIST A/S Haraldsvej 21, 8960 Randers SE Denmark

MORSØ - EHXL Miter Machine Fully automatic, electric/hydraulic Dust free operation - No compressor needed TECHNICAL DATA SUBJECT Double miter DeLuxe measuring scale up to Motor single or three phase Capacity of pump Working pressure Power transmission Tank contents Net weight MORSØ-EHXL is delivered with: • • • • • • • • • dual hand release operation safety guard sliding longitudinal stop second stop waste chute extension table on the left side measuring scale up to 2,500 mm/100” adjustable and automatic rabbet supports adjustable hydraulic clamping cylinders MORSØ-EHXL is available either with...