Damcos® MAS G048
5Pages

Product Data Sheet Process Management

Product Data Sheet SD 8615-2E02 August 2008 General description The MAS G048 inclinometer unit is an electronic angle measurement system, intended for Trim and/or Heel measurements on board any vessel. The angle measurement is performed upon the signal from a solid state gravity sensor. This signal is amplified, and converted into 4 - 20 mA standard loop. Mount the box or unit either vertically or horizontally on bulkhead or in a panel. Mount the box or unit longitudinal or across. Likewise both longitudinal and cross mounting will be possible, whether Trim or Heel measuring is desired. The...

Supply voltage: Power consumption: Ambient temperature: Output signal: Linear range: Enclosure: Case: Glands entry Bulkhead/ mounted in an existing panel Product Data Sheet This drawing shows a dual inclinometer box.

Product Data Sheet SD 8615-2E02 August 2008 Location of components This drawing shows a dual inclinometer box. Calibration procedure - Connect power supply and signal cables accor ding to the drawing under point 2.4.1. - Remember to secure mounting screws and re- check null position/signal. - Adjustment to 12.00 mA is done by means of the trim potentiometer P1, located on the PCB (printed circuit board). - If the rotation polarty is wrong, it is necessary to shift the position of jumper jp4 and jp5. - When the vessel is steady, and on even keel, ap- ply power (allow 1 min. for warm up) and...

Product Data Sheet SD 8615-2E02 August 2008 Main dimensions The Emerson logo is a trademark and service mark of Emerson Electric Co. Damcos and the Damcos logotype are registered trademarks of Damcos A/S. All rights reserved. The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available...