Next Generation Camera Link Frame Grabber on PCIe Gen2 platform ® Building on the field proven capability of Teledyne DALSA’s Xcelera frame grabber series, the Xtium™-CL PX4 is based on industry standard PCI Express™ Gen 2.0 expansion bus to deliver high speed access to host memory. The new Xtium series offers higher bandwidth to sustain Camera Link 80-Bit modes over longer cable distances and supports a wide variety of area and line scan color/monochrome cameras, all in a compact, half-length, single slot solution. ® Features • alf-length PCI Express Gen H 2.0 x4 Board • Camera Link Rev 2.0 compliant • cquires images from one Base, A Medium or Full Camera Link camera • upports Camera Link S operations up to 85MHz • xtended cable distance at max E data rate • nhanced feature set supports E advanced Camera Link pixel/tap configurations • indows , Windows 7, and W Windows 8 (32/64-bit) compatible • ully supported by Sapera Vision F Software SDKs • FCC, CE and ROHS compliant • oCL support for all Camera Link P configurations The Xtium-CL PX4 takes full advantage of PCIe Gen 2.0 x4 platform to deliver a bandwidth in excess of 1.7GB/s, while at the same time supporting PCIe Gen 1.0 slot to deliver 850MB/s. The newly engineered, on-board, Data Transfer Engine (DTE) produces maximum bandwidth without the need for specialized motherboards or chipsets. By enabling maximum sustained throughput and ready-to-use image data, the Xtium-CL PX4 minimizes CPU usage and improves processing times for the host applications. In addition, the Xtium series has been engineered with enhanced memory architecture allowing it to handle different sensor tap topologies while sustaining color decoding at the maximum frame/line rate. The Xtium-CL PX4 offers built-in, robust electrical signals for external event synchronization, and status notification LEDs. One or more boards can be synchronized to acquire images from multiple area or line scan cameras simultaneously. The Xtium-CL PX4 supports one Base, Medium, Full or 80-bit mode or two Base Camera Link cameras with Base/Medium/Full PoCL capabilities. 1 The Xtium series is engineered to meet the ever-increasing image resolution and faster frame rates of today’s camera technology. In addition to PCIe Gen 2.0 x4 and Camera Link, upcoming models will support Camera Link HS as well as other popular interface standards on a PCIe Gen 2.0 x8 platform. Fully Supported By Sapera™ Vision SDK The Sapera Essential standard processing tool run-time license is offered at no additional charge when combined with the Teledyne DALSA frame grabbers. This software run-time license includes access to image processing functions, areabased (normalized correlation based) template matching tool, blob analysis and lens correction tool. Sapera™ Nitrous accelerates Sapera Essential applications by providing a seamless support for graphical processing units (GPU) and multi-core CPUs optimization (MCO). Sapera™ Architect Plus gives system integrators and industrial vision automation specialists a user-friendly, non-programming graphical environment to quickly prototype and test drive application specific imaging tools within Sapera Essential and Sapera Nitrous.

• amera Link Specifications Rev 2.0 C compatible • alf length PCI Express x4 Rev 2.0 H compliant • GPIO – 16-pin Shrouded header • upports one Base, Medium or Full S Camera Link area and line scan camera • cquisition pixel clock rates from 20MHz A to 85MHz • omprehensive event notification includes C start/end of frame/transfer • amera control signals for external event C synchronization • -optically isolated inputs can be configurable 4 as Trigger or general purpose inputs; tolerate 5, 12 and 24VDC signals • 4 reconfigurable TTL outputs • C independent serial communications ports P provide support...