Catalogs >
Dalsa >
Xineos-1515 GigE/CL

Xineos-1515 GigE/CL
2Pages

Catalog excerpts

CMOS Flat Detector for Dynamic X-Ray Imaging Xineos CMOS X-Ray Flat Detectors: Better Images, Lower Dose The Xineos-1515 CMOS flat detector sets new benchmarks in low dose imaging performance. Built with our sixth generation CMOS technology, Xineos-1515 offers switchable saturation dose to maximize dynamic range or sensitivity on demand. With a 15x15 cm active area, the Xineos-1515 images an entire adult mandible, and with a programmable region of interest (ROI) that is flexible in size, position and frame rate (e.g. 15x1 cm @ 300 fps), a single detector can deliver optimized image quality for different procedures, e.g. both Dental CBCT and Panoramic 2-in-1 systems. Key Features • atest generation CMOS technology L — even lower noise, lower power consumption • witchable pixel sensitivity for S highest sensitivity AND highest dynamic range • nmatched image quality at low U doses, best-in-class DQE at all doses • igh frame rates: 30 fps full H resolution, up to 300 fps with adjustable ROI mode • erves dental CBCT and Panoramic S with the same detector • mallest shoulder edge distance in S industry (7.3 mm) for smaller detector head design and better patient access • Negligible image lag Typical Applications • Dental CBCT + Panoramic • Orthopedic Surgery • Industrial / Non-Destructive Testing Industry-leading low-dose performance and 30 fps operation make Xineos-1515 ideal for realtime fluoroscopy. Built-in defect correction and gain/offset (flat-field) correction ensure the best diagnostic image quality. The Xineos-1515 is also built the industry’s smallest shoulder edge (7.3 mm) for the most compact shell designs. With no need for external cooling, the low power CMOS design needs less space in crowded application environments. Specifications (Typical Values @ RQA5) Resolution Pixel Size X-Ray Sensitive Area Energy Range Saturation Dose - High Dynamic Range Mode - High Sensitivity Mode Frame Rates - Full area, full resolution - Full area, 2x2 pixel binning - 15x1 cm ROI, full resolution ADC Conversion Dynamic Range - High Dynamic Range Mode - High Sensitivity Mode DQE (@ 0 lp/mm, RQA5) MTF (@ 1 lp/mm, RQA5) Image Lag Non-Linearity Data and Control Interface Readout mode Power Supply Power Consumption Weight 1548x1548 99x99 µm 151x151 mm 40..125 kV 9 µGy (0.9 mR) 2 µGy (0.2 mR) 30 fps (CamLink), 22 fps (GigE) 60 fps 300 fps 14 bits (16384 levels) 74 dB (5300:1) 71 dB (3500:1) 70% 60% <0.1% <1% Gigabit Ethernet or CameraLink (Base) Asynchronous, Slave or Master +12 Vdc 10 W (GigE), 6 W (CamLink) 3.5 kg

Open the catalog to page 1

CMOS Flat Detector for Dynamic X-FteylmagTr^r* delivering highest signal-to-noise ratio camera replacement After 50 years of Image Intensifier (II) dominance in low dose X-ray applications, Teledyne DALSA has introduced a complete family of CMOS Flat X-ray Detectors. Xineos combines ll-CCD low-dose diagnostic image quality with the form factor and resolution benefits of flat detectors. Extended field-of-view coverage with only X-Ray Detector DQE(O) @ RQA5 Detective Quantum Efficiency (DQE): To become an accurate indicator of detector performance, DQE value must be reported at a specific...

Open the catalog to page 2