Fast, flexible, highly reliable image acquisition The X64-CL iPro is a highly versatile PCI frame grabber capable of acquiring images from two independent Base or one Medium Camera Link cameras and performing image transfers at rates up to 528MB/s. Its low cost, combined with its ability to support multiple tap configurations from both area and line scan cameras simultaneously; in addition to its on-board FPGA based processing (including Bayer decoding and real-time shading correction) makes the X64-CL iPro an ideal solution for a wide variety cost-sensitive applications where flexibility, performance and reliability cannot be compromised. ® Teledyne DALSA Platform Development Advantage - Free Run-Time Licensing The Sapera Essential standard processing tool run-time license is offered at no additional charge when combined with the Teledyne DALSA frame grabbers. This software run-time license includes access to over 400 image processing functions, area-based (normalized correlation based) template matching tool, blob analysis and lens correction tool. 1 Key Features • Simultaneous acquisition from two Base or one Medium Camera Link cameras ® • FPGA based processing including Bayer decoding and shading correction • Supports acquisition for a wide range of • Trigger-to-Image Reliability ensures secure image capture • On-board Quadrature shaft-encoder • Acquisition pixel clock rates up to • Low-Cost/High Performance • eledyne DALSA Platform Development T Advantage – Free Run-time Licensing Some conditions and limitations apply, contact Teledyne DALSA sales for details.

Camera Link Base x 2 Configuration Data FVAL LVAL DVAL SPARE CLK1 Auxiliary Slot Data & Grab Controls CLK CC1 CC2 CC3 CC4 TX RX Camera Link Receiver LVDS Drivers and Receiver Time Base Indicators Camera On/Grab On Camera Link Base x 2 Configuration General I/O (optional) General Inputs General Outputs Image Control Reloadable Processing Engine (RPE) Strobe Shaft Encoder Auxiliary Slot Primary Slot X64-CL iPro—Functional Block Diagram Host PCI-X 3.3 or 5V Slot

Trigger-to-Image Reliability Hardware Bayer Decoding The X64-CL iPro has been built within Teledyne DALSA’s Trigger-to-Image Reliability technology framework. High-speed in-line machine vision applications require tight integration between the trigger, strobe, camera exposure and frame grabber acquisition to ensure data integrity. Triggerto-Image Reliability leverages Teledyne DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the PCI bus, providing traceability...

Simplified Set-up and Operation Visual Status LED Image Processing and Analysis The X64-CL iPro further facilitates ease-of-use by utilizing visual status LEDs, mounted on the card’s bracket, to simplify system installation and setup. A status indicator LED provides visual feedback when the correct camera connection is made and when a grab is in progress. These visual indicators allow developers to instantly recognize if cabling has been correctly set up greatly facilitating the diagnostic process. For image processing and analysis Teledyne DALSA offers Sapera Processing. Sapera Processing software...

Specifications* Function Camera Link Specifications Rev 1.10 compliant Half length 64-bit PCI-X 66MHz compatible 5V and 3.3V slot ready Supports two independent Base or one Medium Camera Link area or line scan cameras Acquisition pixel clock rates up to 85MHz Comprehensive event notification includes end/ frame/transfer Independent timing control logic for up to two Camera Link cameras Two independent TTL/LVDS trigger inputs programmable as active high or low (edge or level trigger) Two independent TTL Strobes outputs Two PC independent serial communications ports provide seamless interface to...