K E Y F E AT U R E S • Acquires images from one Base, Medium or Full Camera Link camera • Rapid image acquisition rates up to 680 MB/s and highspeed image transfer to host memory at 528MB/s • Up to 2GB local frame buffer • Supports Camera Link operations up to 85MHz Camera Link ™ frame grabber for high speed machine vision Compatible with one Base, Medium or Full Camera Link camera, the X64-CL Full is universal PCI slot compliant and supports all standard multiple tap area and linescan color and monochrome Camera Link cameras. For greater versatility, the X64-CL Full can also inter face with custom camera formats, including pixel depths and tap configurations not covered by the Camera Link standard. The X64-CL Full has been built within DALSA’s Trigger-to-Image Reliability technology framework. Trigger-to-Image Reliability leverages DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the PCI bus. Trigger-to- Image Reliability enables more efficient and reliable machine vision inspections by securing the image acquisition process, providing traceability when errors do occur and permitting recovery from those errors.

Twisted Pairs MDR26 #1 Data & Grab Controls CLK Data FVAL LVAL DVAL SPARE Camera Link Receiver LVDS Drivers & Receiver Frame Buffer Memory (32MB - 2GB) Twisted Pairs Data & Grab Controls CLK Camera Link Receiver 2 Camera Link Receiver DVAL SPARE Data FVAL LVAL DVAL SPARE CLK Data FVAL LVAL Shaft Encoder Data & Grab Controls Twisted Pairs Destinaton Buffer Address Table X64-CL Full - Functional Block Diagram Unprecedented Acquisition Control Successful industrial machine vision applications require consistent and predictable results in demanding operating environments. The X64-CL Full Acquisition...

The DMAs allow the DTE to transfer images from the acquisition Software Support control unit to local frame buffer memory, or transfer the same Acquisition, processing and analysis image to multiple addresses in the host memory. The ACU and DTE use the onboard memory to per form these operations concurrently, yet at different rates, yielding optimal utilization of system bandwidth. Moreover, the X64-CL Full now supports up to 2GB of onboard memory for higher speed frame rate cameras. The X64-CL Full is fully supported by DALSA’s Sapera™ LT software development libraries enabling applications...

Specifications* Board •Half length PCI 2.1 64-bit 66MHz compliant •5V and 3.3V slot compatible •Acquisition rates up to 680MB/s •Horizontal Size (min/max): 8 byte/256KB •Vertical Size (min/max): Linescan cameras: 1 line to infinity Area scan cameras: 1 line to 16 million/frame variable length frames •Onboard frame buffer memory up to 2GB (32MB standard) •LUT: One 8 or 10-bit(mono/RGB) or 12-bit (mono) input lookup table1 •Single slot solution supports 1 Medium, 1 Base or 2 synchronized Base Camera Link cameras •Interfaces to digital area scan or linescan color or monochrome cameras •Supports...