Catalogs >
Dalsa >
Piranha HS 6k

Piranha HS 6k
2Pages

Catalog excerpts

Piranha HS-S0-06K80-00-R High Sensitivity Line Scan Cameras 6k resolution and 142 kHz line rate The Piranha HS 6k camera with a maximum line rate of 142 kHz is the newest member of the HS family of high sensitivity line scan cameras. The HS 6k camera is capable of bidirectional operation with up to 256 stages of selectability, while preventing overexposure with antiblooming features. Camera configuration is flexible and all software is controllable. Key Features • 6,000 pixels • 10.4 µm pixel size • Max 142 kHz line rate • Responsivity 1200 DN/(nJ/cm²) @ 0 dB, 8 bit • Bidirectional • Antiblooming • HSLink interface Programmability • Up to 256 TDI stages selectable • Selectable area mode of operation for ease of alignment • Up to four sets of flat field correction coefficients • Mirroring and forward/reverse control • Flat field corrections Typical Applications • Wafer inspection • Flat panel display inspection • PCB/electronics inspection • Large web applications • High performance document scanning • Low light applications Specifications Resolution 6,000 x 256 pixels TDI Data Rate Up to 852 Mpix/s Max. Line/Frame Rate 142 kHz Pixel Size 10.4 μm x 10.4 µm Data Format 8, 10, or 12 bit Output HSLink Lens Mount M72 x 0.75 Responsivity 1200 DN/(nJ/cm²) at 0 dB, 8 bit Dynamic Range 1024 : 1 (typical at 0 db, 10 and 12 bit) Nominal Gain Range 0 dB to 20 dB Size 180 mm (H) x 90 mm (W) x 92.1 mm (D) Mass < 1500 g Operating Temp 0 °C to 50 °C Power Supply 24 VDC Power Dissipation < 45 W Regulatory Compliance RoHS and CE Control HSLink Data Shared with Control Power Lemo 2 pin Example Part Number HS-S0-06k80-00-R

Open the catalog to page 1

Piranha HS-S0-06K80-00-R High Sensitivity Line Scan Cameras HS-S0-06K80-R Spectral Responsivity & Quantum Efficiency RECOMMENDED AIRFLOW RECOMMENDED AIRFLOW Imaging area aligned in X-Y with respect to datums B and C. Roataion of the CCD imaging area is ±0.6 degrees. Lens mount position with respect to imaging area: X-Y ±0.175 MM. Imaging area position tolerances are to be determined. Units: MM. www.teledynedalsa.com Americas Boston, USA +1 978-670-2000 sales.americas@teledynedalsa.com Europe Krailling, Germany +49 89-89-54-57-3-80 sales.europe@teledynedalsa.com Teledyne DALSA has its...

Open the catalog to page 2