Catalogs >
Dalsa >
PC2-CamLink

PC2-CamLink
4Pages

Catalog excerpts

K E Y B E N E F I T S Linescan Camera Support • Variable frame length acquisition • Supports infinite vertical length frame (8K pixels x infinite number o f line s ) • Shaft encoder with tick divide r Area Scan Camera Support • Frame size up to 8K pixels x 8K lines Visual Status LED • Facilitates installation by providing visual status of the acquisition • Separate indicator for trigger detection • Visible on PCI b r a c k e t Extensive Trigger Interface Options • Separate inputs for 2 Optocoupled/TTL and 2 LVDS triggers • Dual phase shaft encoder for line scan application s on 2 dedicated LVDS inputs Building y o u r machine vision system j u s t g o t easier Part of DALSA’s PC2 Series of frame grabbers, the PC2-CamLink™ is ideal for cost sensitive applications. Compatible with one monochrome, area or line scan Base Camera Link™ camera, the PC2-Camlink is a snap to interface to you r vision system thanks to the Camera Link standard and DALSA’s innovative visual status LED. When you connect the camera cable and external triggers the PC2-CamLink visual status LED s, mounted on the bracket, provide an immediate visual indication that all signals are present and active. To further simplify setup, the PC2- Camlink provides direct power (5V or 12V) to your camera. Parallel I/O Connector • 8-bit in/8-bit out registered interface to simplify connectivity to other ma chine vision equip m e n t • Pin-to-pin connector compatible with o the r PC2 Series and PC Vision c a rd s The PC2-CamLink has been engineered within DALSA's exacting Trigger- to- Imaging Reliability technology framework to control and monitor the entire image acquisition sequence.

Open the catalog to page 1

CamLink MDR-26 Base Connector Data Camera Control Camera Link Receiver LVDS UART Acquisition Visual Status LED Acquisition Control Unit Image Data Trigger Opto #1 Trigger Opto #2 Trigger LVDS #1 Trigger LVDS #2 Opto Coupler Trigger Controller LVDS Receiver Shaft Encoder #1 Shaft Encoder #2 Not Connected (factory default) l Host Computer PCI Base 32-bit/33MHz 3.3V/5V PC2-CamLink Functional Block Diagram Built-in Reliability and Ease of Use Trigger Controller The trigger controller supervises all trigger inputs coming into The PC2-CamLink has been engineered within DALSA’s exacting...

Open the catalog to page 2

Channel Scanning The parallel I/O controller offers a convenient way to interface t o p o l o g y : 1-channel raster, 2-channel interleave pixels, 2-channel thePC2-CamLink to other controllers within the ma chine vision interlines, and 2-channel ha lf-line segmented. Pixel depths up to 1 6- system. It features 8 inputs, a strobe in put (used to latch the 8 bit a re also supported. Pixels can optionally be truncated to 8-bit to in put data), 8 outputs, and a strobe out (used to latch the 8 output ease camera setup an d lo w e r PCI bandwidth. data a t the receive r). The PC2-CamLink also h...

Open the catalog to page 3

* Last updated February 2007 7075 Place Robert-Joncas, Suite 142, St-Laurent, Quebec, Canada H4M 2Z2 Visit us online @ www.imaging.com All trademarks are registered by their respective companies. DALSA reserves the right to make changes at any time without notice. C0DS-1182» DALSA 2007

Open the catalog to page 4