Maxipartner

Product catalog summary

Overview: The MAXIPARTNER MX is a pneumatic manipulator designed for handling heavy and off-set loads with ease and safety. It features articulated arms and is suitable for various industrial applications.

Specifications:

Weight Capacity: 900 Kg
Radius: 4500 mm
Pressure: 0.7-0.8 MPa
Vertical Lift: 2200 mm

Versions: The manipulator is available in different configurations including column mounted, overhead mounted, and overhead trolley mounted. Each version has specific mounting requirements and dimensions.

Mounting Details:

Column Mounted (MXC): Requires a fixed base-plate with specific hole dimensions for support.
Overhead Mounted (MXF): Requires a compressed air attachment point and specific support dimensions.
Overhead Trolley Mounted (MXS): Requires specific interaxis distances for support rods.

Air Supply: The manipulator requires dry and oil-free compressed air with a constant pressure of 0.7-0.8 MPa.

Customization: Configurations and measurements can be adjusted based on customer requirements.

Note: Technical data and measurements are indicative and subject to change without notice.

Catalog excerpts

Industrial Manipulators WEIGHT CAPACITY 0.7-0.8 Mpa Joint brake LOAD VERTICAL LIFT Joint brake Joint brake Pneumatic Manipulator MAXIPARTNER MX with articulated arms MAXIPARTNER MX, designed and realized particularly for difficult handlings, meets the requirement to move heavy and off-set loads, in any direction, allowing the operator to work with the minimum effort in good ergonomic and safety conditions. MAXIPARTNER PE PARTNER EQUO - - MX ® COLUMN FIXED OVERHEAD RUNNING OV

Open the catalog to page 1

Vertical lift 1600 mm Min. overall dimensions 2000 mm Max. overall dimensions.~4250 mm Vertical lift Structural versions: column mounted on fixed base-plate, autostable base-plate of our Max. radius (mm) 2500 supply properly dimensioned or with autostable motorised trolley that translates on a Min. radius (mm) 900 simple profile track on the floor. Hole to be made on the support Compresed air attachment point Vertical lift 1600 mm Min. overall dimensions 2000 mm Flange attachment height 4500 mm Support to be mounted by the customer No. 12 holes ø 20 Flange attachment height Vertical lift Maxipartner...

Open the catalog to page 2

Maxipartner

Maxipartner

Catalog excerpts

All DALMEC catalogs and technical brochures