Cassaforma Muro
10Pages

Disposable formworks for the simultaneous casting of foundation beams and the slab

S Foundations SWITCHBOARD Telephone Fax FOREIGN COMMERCIAL SECRETARY OFFICE Telephone Fax e-mail TECHNICAL SECRETARY OFFICE Telephone Fax e-mail

variable height from 56 cm to 150 cm Cassaforma Muro (Wall formwork) was designed as an alternative to traditional wood shuttering, which permits casting walls at a height, reversed beams and foundation bases, drastically reducing the time for creating the foundation. This disposable formwork consists of a combination of pipes, panels, collars and stirrups all made of polypropylene. In combination with the Atlantis system, the Wall formwork makes it possible to create foundation beams and a slab, which optimises and speeds up the work in the building site, with considerable economic...

Muro formwork in coherence with its purpose, which is quick and easy work in the construction site, is characterised by simple, lightweight parts that permit intuitive and quick assembly with multiple advantages: • Less time used for shuttering and deshuttering. • Saving time in cleaning the planking, which will be smooth and clean. • Saving time and expenses related to storing, depositing and transporting formworks; the material is not bulky and is not affected by bad weather. • A specialised workforce is not required. • Simultaneous casting of the foundation beams and slab if combined...

Technical data Component quantity table based on the height of the Atlantis unit Stirrups Inner Stirrups The Wall panel can be easily adopted in height and width to project needs with a simple yard tool, guarateeing maximum assembly speed and flexibility. Atlantis height Wall panel Stirrups bracket * Linear metres in reference to the length of each formwork wall. Intermediate Stirrups Supply and installation cost grid No. Supply of the “Wall” panel for Atlantis h=76cm Collar supply Supply of the lower stirrup Supply of the intermediate stirrup Supply and positioning of the connection forks...

Application examples Perimeter section of the cavity with Atlantis and Muro. Daliform Group technical office FEASIBILITY STUDY Predimensioning and optimisation of the structures, comparative and/or revised proposals, material and manpower estimates, cost analysis. Evaluation of forced ventilation in the case of cold rooms. CALCULATION REPORT Reports certifying the execution of Daliform Group constructive systems. SUPPORT FOR THE EXECUTIVE DESIGN Support by design professionals. Upon request, the formwork positioning plan can be supplied with a list of the products required to carry out the...

Creating a foundation and under-floor cavity with Muro and Atlantis Formworks Placing the foundation reinforcements on the prepared light concrete base. Nailing along the inner and perimetric foundation beams of the lower stirrups and pipe base at an equal distance, approx. every 50 cm. Place the initial panel by inserting it in the guide of the lower stirrups and fasten it on the top with the collars inserted on the pillars. After assembling the first Atlantis formworks, position the intermediate stirrups on the panel and then connect the stirrups and collars of the opposing pillars with...

Specifications Creation of a lightened raft in reinforced concrete with a total thickness of ______ cm. The formwork spaces will be created on site through the combined use of recycled plastic formworks, such as “Atlantis” and “Wall formwork” from the Daliform Group. The project will be carried out as specified below: a) Supply and laying of steel bars and welded mesh to create the first slab on the ground, and the vertical stiffeners (internal and perimeter plates) for the raft. Price euro/kg ____________ b) Formation of the first slab on the ground for the lightened raft through the...

Tel. +39 0422 2083 - Fax +39 0422 800234 export@daliform.com - www.daliform.com Via Serenissima, 30 - 31040 Gorgo al Monticano (TV) - Italia Italy Certified Management System UNI EN ISO 9001, UNI EN ISO 14001, BS OHSAS 18001, SA 8000 Rating di legalità: Socio of Partnerde GBC Italia