GCM-080213M Mini Stainless Steel Precision Lens/Mirror Holder GCM-080305 CCD Transfer Holder GCM-08041 4D Precision Lens/Mirror Holders GCM-08081 Slim Lens/Mirror Lockable Holders GCM-0811 Simple Lens/Mirror Holders GCM-081101 /02/03M 45°Lens/Mirror Holders GCM-083904M X-Y Lens/Mirror Holder GCM-0858 Precision Lens/Mirror Holders GCM-0868 Precision Lens/Mirror Holders GCM-0878 3D Kinematic Lens/Mirror Lockable Holders GCM-0888 Stainless Steel Precision Lens/Mirror Holders GCM-100302M Cylindrical Lens Adjustable Holders

Catalog Products & Supplies Optic Holders GCM-080213M Mini Stainless Steel Precision Lens/Mirror Holder Daheng Optics offers mini stainless steel precision lens/mirror holder for 12.7mm optics. This holder offers angular adjustment along with both X and Y direction.

GCM-080305 CCD Transfer Holder GCM-080305M CCD transfer holder is used to set up the filters with minimum thickness 2mm in front of the CCD camera. The thread of one side is 1 ”-32 male thread, can be matched with C mount of CCD camera. And the thread of other side is 1.035”-40 female thread. There are two kinds of locking mode: locking ring and locking screw.

GCM-08041 4D Precision Lens/Mirror Holders The GCM-08041 series of 4D Precision Lens/Mirror Holders has many different sizes to meet different requirements. By adjusting four of fine threads, the lens or mirrors can be precisely horizontal adjusted in both X and Y direction. And they may be titled about the Y and Z axes.

Optic Translation Rotation Tilt Mechanical Holders Stages Stages Platforms Accessory {adhc Daheng Optics GCM-08081 Slim Lens/Mirror Lockable Holders The GCM-08081 series of Slim Lens/Mirror Lockable Holders has many different sizes to meet different requirements. The adjustment range for single axis is ±4°. The thread pair is axially locked, and the spot is more stable during the locking process. These holders are more suitable for thinner optics. GCM-08081 series Adjusting screw locking nut #2 Hex Key Slot 0d 0D

GCM-0811 Simple Lens/Mirror Holders The GCM-0811 series of Simple Lens/Mirror Holders offer different sizes. These holders can be used with post GCM-0301 and other products.

{adhc Daheng Optics GCM-081101 /02/03M 45°Lens/Mirror Holders The series of 45°Lens/Mirror Holders can make the light path turn 90 degrees. The minimum thickness of mounting optics should be thicker than 2mm. The locking method used is the top wire lock. In addition, the holders are equipped with bosses with diameter of 25.4mm. Users need to use these holders to fit with other optomechanical components with 25.4mm interface. GCM-08110 GCM-08110 series Part No. A B C D d E F H

GCM-083904M X-Y Lens/Mirror Holder Daheng Optics offers holders for tf> 25.4mm optics with maximum thickness 5mm. The adjustment range is ±1mm. The holders can be connected to the post GCM-03011 through the bottom M4 thread hole. lers Stages Stages Platforms Accessory

Optic Translation Rotation Tilt Mechanica Holders Stages Stages Platforms Accessory {adhc Daheng Optics GCM-0858 Precision Lens/Mirror Holders The series of Precision Lens/Mirror Holders, GCM-0858, is designed to mount a lens or mirror. By adjusting the two of fine threads, the lens or mirrors can be precisely adjusted in both pitch and rotation directions. The adjustment range for single axis is ±4°. There is a M4 tapped hole on the holder for connecting to a post mount or other products.

GCM-0868 Precision Lens/Mirror Holders The series of Precision Lens/Mirror Holders, GCM-0868, is designed to mount a lens or mirror. By adjusting the two of fine threads, the lens or mirrors can be precisely adjusted in both pitch and rotation directions. The adjustment range for single axis is ±4°. There is a M4 tapped hole on the holder for connecting to a post mount or other products. Lock Screw #2 Hex Key Slot Part No. 0 D 0 d H A*A

Optic Translation Rotation Tilt Mechanical Holders Stages Stages Platforms Accessory GCM-0878 3D Kinematic Lens/Mirror Lockable Holders The series of 3D Kinematic Lens/Mirror Lockable Holders, GCM-0878, has many different sizes to meet different requirements. They provide high precision screws for adjustment. The adjustment range for single axis is ±4°.

Catalog Products & Supplies Optic Holders GCM-0888 Stainless Steel Precision Lens/Mirror Holders High quality stainless steel is used for the series of Precision Lens/Mirror Holders, GCM-0888. These Precision Lens/Mirror Holders provide good stability, high corrosion resistance and can be used for vacuum applications.

{adhc Daheng Optics GCM-100302M Cylindrical Lens Adjustable Holders Daheng Optics offers adjustable holders for cylindrical lens with height 5-50.8mm. The adjustment range for single axis is ±4°. Fixed base has M6 threaded hole and 4>4mm hole.