1. Catalogs
  2. DAH Solar Co., Ltd.
  3. DHM-54X10/BF/FS(BB) 400~410W

DHM-54X10/BF/FS(BB) 400~410W
1 /2Pages

DHM-54X10/BF/FS(BB) 400~410W

DHM-54X10/BF/FS(BB) 400~410W
1 /2Pages

Catalog excerpts

DHM-54X10/BF/FS(BB) 400~410W-1

Quality Guarantee 12-year Material & technology warranty 30-year Linear power output warranty No Water & Dust Accumulation, Increases Power Generation by 6-15% Full-Screen PV Module has front frameless design, which decreases power loss and the O&M expenditures caused by the bottom dust shading. Up to 25% Power Generation Growth From Rear Side The transparent grid backplane is used to harvest the sunlight reflection, which significantly Improves the total power generation. Applied to All Mounting Scenarios Full-Screen PV Module could apply to all the application scenarios, — and the smaller angles of inclination, the higher power generation. DAM Solar linear power output guarantee Standard linear power output guarantee Comprehensive Products & System Certificates (g)g Preeminent Weather Resistance Certified by Dust-Sand Test, Salt Spray Test, Ammonia Test, ™ which allows the module to keep an excellent performance under the extreme weather conditions. ±0.1mm Production Accuracy Technology Using excellent frame sealing technology makes the production accuracy achieve ±0.1mm to ensure the IP68 Waterproof and the mechanical load (front side: 5400Pa; back side: 2400Pa) . The ruggedness could compare with the architectural curtain wall. © (€ ? @S IEC 61215 / IEC 61730 / CE / F IDE / INMETRO ISO 45001 : 2018/lrtemational standards for occupational health & safety IS014001 : 2015/Standards for environmental management system ISO 9001 : 2015/Quality management system

 Open the catalog to page 1
DHM-54X10/BF/FS(BB) 400~410W-2

400~-410W Mechanical Specification Cable (Including connector) No.of Cells 3.2mm High Transmission, Antireflection Coating Cells Type Dimension Maximum system voltage Operating Temperature Maximum series fuse rating Snow load, frontside/Wind load, backside Application level Nominal operating cell temperature Electrical Characteristics DHM-54X10/BF/FS(BB) Module Type Maximum Power (Pmax) Open-circuit Voltage (Voc) Maximum Power Voltage (Vmp) Maximum Power Current (Imp) STC: Standard Test Environment : irradiance 1000W/m?, Cell temperature 25°C, Spectrum AM1.5 NOCT: Standard Test Environment :...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.