Overview

The document details specifications and features of modular walk-in cold rooms named "Europa" by Dagard, a French manufacturer. These cold rooms are designed for commercial and industrial refrigeration applications, offering flexibility in configuration, insulation, and door options.

Modular Cold Room Panels

• Construction: Panels and ceilings use camelocks with thicknesses of 60, 100, or 150 mm.
• Materials: Iceberg white (RAL 9010) powder-coated smooth steel facings with high-density polyurethane foam core (HCFC-free). Optional coatings include stainless steel, PVC, PET, and grey lacquered steel (RAL 9006).
• Thermal Properties: Thermal conductivity λ = 0.023 W/m/°C; density 40 kg/m³.
• U-Values: 0.37 W/m²·°C (60 mm), 0.22 W/m²·°C (100 mm), 0.15 W/m²·°C (150 mm).
• Fire Reaction Class: Standard C,s3-d0; optional B,s3-d0 (M1).

Floor Panels

• Thickness options: 60, 100, or 150 mm with high-density polyurethane foam core (HCFC-free).
• Lower facing: lacquered steel; upper facing options:
• Standard: 9 mm plywood + phenolic resin with anti-skid hexagonal pattern (no rolling load).
• Optional PVC-coated floor: grey PVC sheet bonded on 10 mm plywood.
• Optional aluminium reinforced plate (2 or 4 mm thick) for negative temperatures.
• Optional stainless steel reinforced floor: embossed stainless steel glued to plywood reinforced with steel plate.
• All facings are food contact safe.

Dimensions and Configurations

• Inside height options vary by module size (20 cm or 40 cm increments), ranging from 201.5 cm up to 321.5 cm and beyond.
• Inside dimensions range from 80 x 80 cm up to 600 x 960 cm, with modular increments.
• Outside height depends on panel thickness and floor presence, with specific allowances for floor bearers.
• Rooms can be partitioned or coupled to create complex configurations.

Thermal Use Cases

• 60 mm panels: suitable for positive temperature applications.
• 100 mm panels: suitable for negative temperatures down to -25°C.
• 150 mm panels: suitable for negative temperatures down to -40°C (frozen products).

Doors

• Insulated Hinged Doors: 60 mm thick for positive, 100 mm for negative temperatures; corrosion-resistant PET and lacquered steel facings; keylock with safety opening; heater tape for negative temps.
• Insulated Sliding Doors: 60 mm thick for positive, 120 mm for negative temps; white lacquered steel; aluminium rail; thermal bridge break; heater tape.
• Service Doors: 40 mm thick; white lacquered steel; wiper gasket; PVC handles.
• Swinging Doors: 40 mm thick; anti-finger pinch seal; vision panel 60 x 30 cm; optional PET, PVC, stainless steel, or powder-coated steel leaf.

Floor Load Capacities

Options and Accessories

• Shelvings: 3 levels, max load 90 or 120 kg per level, depths 400 or 500 mm, configurable in straight, L, or U shapes.
• Racks and ventilation raters (6 x 4 cm), installable vertically or horizontally.
• Strip curtains, corner profiles, skirtings, handrails.
• Pressure relief valves and access ramps.

Recommendations for Use and Maintenance

• Regularly monitor internal temperature and adjust set points as needed.
• Inspect and replace gaskets and hardware to maintain performance.
• Clean with standard smooth agents at temperatures below 30°C; rinse and dry thoroughly.
• Avoid abrasive powders, ketonic or chloridic solvents, metallic or hard brushes.
• For persistent stains, use alcohol or light solvents like type "C" petrol.
• Do not wash negative temperature cold rooms with large quantities of water to prevent ice formation.

Manufacturer Information

Dagard, a French manufacturer with over 60 years of experience in insulation and cold room production, offers a range of cold rooms and refrigeration cells including Taïga, Toundra, and Easy Bloc lines.

Contact details:
Route du Stade - 23600 Boussac - France
Tel: +33 (0) 555 824 000
Fax: +33 (0) 555 658 010
Fax Export: +33 (0) 555 651 854
Email: [email protected]
Website: www.dagard.com