*mydirectindustry

SLOT SENSOR

Product catalog summary

Overview

This document details technical specifications, models, and application guidelines for various sensor types including outlet type slot sensors, proximity sensors (inductive and capacitive), photoelectric sensors, safety carpet sensors, safety side sensors, laser ray bars, and test boxes. It covers physical and electrical characteristics, installation methods, protection features, standards compliance, and best practices.

1. Outlet Type Slot Sensors

Models & Appearance: Four main models (81, 82, 83, 84) with slot widths from 5mm to 120mm, customizable for specific environments (e.g., oil, chain applications).
Connection & Output Modes: Connection types: Y (plug-in), Z (lead out), L (detected object light); Output types: PNP (P), NPN (N).
Key Specs: Sensing range ~5mm; response time ≤0.3ms; infrared LED (940nm); working voltage ≤1.5V with 100mA load current; surge and reverse polarity protection.
Physical & Electrical: Materials include stainless steel and plastics; standard 2m 4-core cable; red LED indicator for detection status.
Operating Environment: No freezing or condensation; specified temperature and humidity ranges.

2. Proximity Sensors

Types & Installation: Inductive and capacitive sensors in cylindrical, square, micro square, and standard sizes; embedded and non-embedded installation.
Electrical & Mechanical Specs: Detection distances 1.5mm to 25mm; working voltage 5-30V or 10-30V DC; output types include NPN/PNP (normally open/closed), analog current/voltage; protection against short circuit, reverse polarity, surge.
Materials & Environment: Stainless steel, nickel copper alloy, plastic; specified operating temperature and humidity.
Performance: Detailed switching frequency, response times, residual voltage, leakage current, repetition precision, and consumption current per model.

3. Photoelectric Sensors

Models & Types: Cylindrical, general square, flat, background suppression; detection methods include diffuse reflection, ejection, retroreflective, limited reflection.
Electrical & Optical: Working voltage 5-30V or 10-30V DC; detection distances 5mm to 2000cm; infrared LEDs (880-940nm); output modes NPN/PNP open collector, analog current/voltage; yellow and red LEDs indicate power and output status.
Environmental & Protection: Operating temperature -25°C to +55°C; humidity 30%-85% operating, 35%-95% storage; protections include reverse polarity, short circuit, mutual interference; vibration and impact resistance tested.
Installation & Wiring: Plug-in or cable type (2m standard); wiring diagrams for NPN/PNP outputs; materials include nickel copper alloy cases, PBT shells, PC lenses.

4. Circuit Diagrams and Wiring

Detailed circuit diagrams for slot, inductive, capacitive proximity, and photoelectric sensors are provided. Wiring color codes and load connection instructions ensure correct installation and operation.

5. Standards and Testing

Slot sensors: Standard shuttle test and repetition precision metrics.
Photoelectric sensors: Electrical and mechanical endurance tests including vibration and impact resistance.
Environmental photometry limits for sunlight and incandescent lamp exposure.

Critical Information and Best Practices

Select correct output type (NPN or PNP) based on application needs.
Observe polarity and surge protection to prevent damage.
Choose sensor model and slot width appropriate for target object size and detection distance.
Follow wiring diagrams precisely to avoid malfunction.
Consider environmental factors such as temperature, humidity, and ambient light during sensor selection.
Regularly verify sensor response times and repetition precision for reliable operation.

Additional Sensor Specifications

Photoelectric Sensors: Output max ≤100mA/30V DC; power (green) and output (orange) indicators; selectable light-on/dark-on modes; ABS shell with PMMA or PC lens; 2m or 3m cables with 3 or 4 cores; sensitivity adjustable via multi-ring potentiometer; environmental limits include sunlight ≤10,000 Lux and incandescent lamp ≤30,000 Lux.
Safety Carpet Sensor (DT Series): Designed for heavy-duty industrial use (automotive welding, shipyards, tire factories); NBR oil-resistant rubber with anti-slip surface (R9 grade); detects weights >20 kg; withstands up to 8000N/cm; 16 standard sizes with customizable dimensions and thickness (11mm, 15mm, 20mm); standard 5m cable; compliant with IEC61508, EN1760-1, ISO13856-1; combined with LCS safety relay achieves Performance Level e (EN-ISO13849); specifications include trigger force, max load, mechanical life, response time, ambient temperature, protection grade, humidity, and EN1760-1 classification.
Safety Side Type Sensor: Length 200mm; 2-core or 4-core cable options; protective material and temperature range specified but limited details.
Laser Ray Bar: Models with horizontal, vertical, and shield brackets; angular rates 0.33° and 0.5°; measurement error ±2cm (high precision) or ±5cm (standard); output modes include obstacle avoidance (NPN/PNP) and measurement with Ethernet output; 270° scanning angle; detection radius up to 20m at 70% reflectivity; infrared laser (905nm), Class 1 safety; 8mm aperture; 25Hz scanning frequency; 0.5° scanning resolution; environmental resistance to fouling, sunlight, fog, dust; indicators for power, fault, operation; front panel button for background learning and reboot; working voltage 9-28V; power consumption 5W; Ethernet 10/100Mbps TCP/IP; vibration, impact, and electromagnetic compatibility per GB/T standards.
Test Box: Supports three-line and two-line detection; output voltage options 5V or 24V with 15mA current for 24V; battery with specified capacity and charging time; mobile power function; features automatic recognition, silent and sleep modes, output short circuit protection; controls include pulse key, LED lamp, power switch, charging input/output interfaces.

General Notes

Materials used: ABS, PMMA, PC, NBR rubber, phosphor bronze contacts, polyester connectors.
Environmental conditions emphasize no freezing, no condensation, and specified ambient light limits.
Compliance with safety and performance standards is highlighted for safety carpet sensors and laser devices.
Accessories include mounting brackets, cables, waterproof sheaths, screws, and installation tools.
Manufacturer contact details and document version date (2018-11) provided.

Catalog excerpts

Comprehensive sample 2018 version

Open the catalog to page 1

SLOT SENSOR ♦ SLOT SENSOR . SLOT SENSOR MODEL SPECIFICATION * SHEET Connection mode: Y: plug in type Z: outgoing L: detected object lights. Y: object detected lamp Output mode: N:NPN ^ K P:PNP type - Shape: 81 type - Sensing range: 5mm _ Trough series: U ★ Wide product line, from 5mm to as large as 120mm * (micro)Perfect replacement of major brand products * It has the lead out type, plug-in, on various ★ Usually open / normally closed out, facilitate ★ It can be customized, such as oil, go chain requirements. ♦ SPECIFICATION FOR OUTLET TYPE SLOT SENSOR

Open the catalog to page 2

SLOT SENSOR♦ SPECIFICATION FOR IN SERT SLOT SENSOR♦ PLUG IN SLOT SENSOR APPEARANCE series Working hours: -25lC—rSS'C save time: -301C—r80‘C, without freezing Working hours: 5%~85%RH save time: 5%~95%RH, without condensation Incandescent lamp ^lOOOLux IP50 PC Plug-in Ambient temperature Ambient humidity Ambien light Protection grade Material Science Entry cable

Open the catalog to page 3

SLOT TYPE SENSOR SIZE AND SPECIFICATION OF GROOVE SENSOR Out of line type:81model indicator light CIRCUIT DIAGRAM OF GROOVE SENSOR Brown Brown Load Main circuit Main circuit Load Load

Open the catalog to page 4

PROXIMITY SENSOR♦ INDUCTIVE STANDARD SPECIFICATION SHEET series

Open the catalog to page 5

DADISICK PROXIMITY SENSOR Leakage current Lagging Induction surface material Working temperature Protection circuit Protection grade NPN •NC (NO) PNP'NC (NO)

Open the catalog to page 6

Installation method

Open the catalog to page 7

INDUCTIVE PROXIMITY SENSOR STANDARD SIZE OF INSERT TYPE Toothed gasket Toothed gasket Toothed gasket Toothed gasket Toothed gasket Toothed gasket INDUCTIVE STANDARD SQUARE APPEARANCE Installation method Model Speciﬁcations Detection distance Material Working voltage Residual voltage Maximum load current Repetition precision Switching frequency Consumption of current Leakage current Lagging Induction surface material Working temperature Protection circuit Protection grade Short circuit protection

Open the catalog to page 8

♦ INDUCTANCE TYPE SMALL SQUARE APPEARANCE Material Working voltage Leakage current Lagging Induction surface material Working temperature Protection circuit Protection grade NPN •NC (NO) PNP'NC (NO)

Open the catalog to page 9

CAPACmVE PROXIMITY SENSOR ♦ CAPACITANCE STANDARD CYLINDRICAL TYPE APPEARANCE Material Working voltage Residual voltage Maximum load current Repetition precision Switching frequency Induction surface material Working temperature Response time Installation method ♦ INDUCTANCE TYPE MICRO SQUARE SIZE SPECIFICATION Unit : mm LE06-01 DD-ZAA LE07-01 □□-ZAA LE08-2.5/03DD-ZAA

Open the catalog to page 10

PROXIMITY SENSOR DADISICK PROXIMITY SENSOR DADISICK ♦ CAPACITANCE STANDARD CYLINDRICAL SIZE SPECIFICATION CK12-03DD-ZBA Plastic nuts Opposite side17 vr , ♦ CAPACITANCE SENSOR CIRCUIT DIAGRAM ♦ CIRCUIT DIAGRAM OF INDUCTIVE SENSOR

Open the catalog to page 11

♦ PHOTOELECTRIC SENSOR MODEL SPECIFICATION - Voltage: A: 10-30V B: 5-30V -Rubber measurement method: A: diffuse reflection B: opposite shot C: retroreflective D: limited reflection — Connection method: Y: plug-in type Z: cable type NPN^NC; NPN^NO; HC: DC two-wire normally closed A: Analog current PNP^PC; PNP^PO; HO: DC two-wire normally open V: Analog voltage Detection distance: 5mm M: Cylindrical F: General square P: Flat B: Background suppression type S: Ultra-thin T: Transparent body detection type C: color standard / color detection type

Open the catalog to page 12

PHOTOELECTRIC SENSOR DADISICK Range of return light source Response time Working voltage Current consumption Control output Working temperature Ambient temperature Protection circuit Protection grade Outgoing way Material weight Switch action lighting Voltage resistance Vibration resistance Impact resistance <20% Infrared photodiode (940nm) Movement and reset: below 3MS 10~24VDC + 10 pulsation (P-P) 10% below s= 30 mA NPN collector output PNP collector output -25 degree -+55, no freezing; storage temperature: -30 C ~+70 C, no freezing. Working humidity: 30%~85%RH; storage humidity: 35%-95%,...

Open the catalog to page 13

DAD/SICK PHOTOELECTRIC SENSOR ♦ CYLINDRICAL SIZE SPECIFICATION GM18-10DD-ZAA ♦ CYLINDRICAL CIRCUIT DIAGRAM Gm08 series NPN output -S~" Gm08 series PNP output Brown© 12-24VDC ♦ UNIVERSAL SQUARE GF20 SERIES APPEARANCE Installation method

Open the catalog to page 14

PHOTOELECTRIC SENSOR DADISICK® PHOTOELECTRIC SENSOR DADISICK® ♦ UNIVERSAL SQUARE GF21 SERIES aPPEaRaNCE Installation method Ejection ♦ Gf21 SERIES CIRCUIT DIAGRAM

Open the catalog to page 15

Detection surface Installation method Model NPN&PNP Detection distance Output mode light source Response time Working voltage Current consumption load current Working temperature Ambient temperature Switch mode Insulation strength Entry cable Texture of material Voltage resistance Diffuse reflection 40mm (white paper) NPN or PNP collector open circuit Red LED(940nm) <1ms 12-24V DC <25mA < 100mA(24V DC) -20'C-+45‘C, No freezing 35%~85%RH, No condensation L.on (light action) /D.on (shading action) type optional. >20MQ/500V DC 4 core connector PC 1000V/AC 50760Hz 1 Minute ♦ BACKGROUND SUPPRESSION...

Open the catalog to page 16

PHOTOELECTRIC SENSOR FLAT CIRCUIT DIAGRAM NPN output FLAT SIZE SPECIFICATION Two meter line Two meter line White Induction surface Induction surface Load Load Operation indicator lamp Operation indicator lamp Connecting cable BACKGROUND SUPPRESSION SIZE SPECIFICATIONS Optic axis Φ3.8 Cable line Output indicator (Orange) Sensitivity regulator Model LED stable indicator (green) NO/NC closed switcher BACKGROUND SUPPRESSION CIRCUIT NPN output Switch output Switch output

Open the catalog to page 17

contact resistance 10m below (DC100V below) Insertion force Below 18N Using ambient temperature range -10!C~+60CC Pull-out force (cover retention) 25N Insertion force Below 5°N Cover material PVP Pull-out force (cover retention) Above 20N Contact point Phosphor bronze Cover material Poly two benzoic acid butanediol ester Contact point Phosphor bronze

Open the catalog to page 18

SAFETY CARPET SENSOR ♦ DT SERIES SAFETY CARPET SENSOR ★ Suitable for heavy-duty factory conditions and special industrial occasions. (Suitable for automobile factory welding workshop, shipyard welding robot, tire factory, metal processing and various types of oil pollution and corrosion environment use). ★ NBR rubber package, NBR oil resistant rubber anti slip surface, anti-skid grade R9. (special corrosion environment can be customized) ★ It is used to detect people or heavy weights above 20 kilograms. ★ 16 sizes or customized dimensions can be customized. ★ It can withstand the heavy load of...

Open the catalog to page 19