Steel Rolling Towers DCM 49 SYS-FAST
14Pages

Steel Rolling Towers

STEEL ROLLING TOWERS SYS-FAST STEEL ROLLING TOWERS The rolling towers system SYS-FAST is characterized by offering all the advantages of the modular scaffolding system and it is fully compatible with this system, too. It also has a wide range of high-strength and low weighted frames. The main characteristics are: • Excellent balance between weight and performance. Frames manufactured with structural steel tube Ø 48 mm in diameter, with ledgers every 50 cm. • Simplicity and speed when assembling. A reduced number of references facilitate the understanding of the system keeping versatility to...

SYS-FAST FRAMES Round tube Ø 48 mm steel uprights available in 135 cm width. Ledgers every 50 cm provide system versatility in the height of the platforms. Available in the following heights: 1 m and 2 m. They have rosettes for connecting the ledgers and the diagonals of the modular scaffolding MEKA 48 every meter as well as a galvanized snap pin. Hot dip galvanized, minimum thickness of 75 microns. STANDARD GUARDRAILS Manufactured with Ø 48 mm pipe, they save time in the assembly and the weight. Protection bar to 0, 5 m by a Ø 25 mm pipe. Hot dip galvanized, minimum thickness of 75...

STEEL ROLLING TOWERS FIXED STEEL PLANKS Planks manufactured in accordance with the EN 12811 standards. An extremely resistant perforated working surface manufactured with antislip grooves. The 2 welded tubes make them easy to handle. Width: 30 cm. Hot dip galvanized and with a minimum thickness of 75 microns. They comply with the 12810-2 fall arrest system requirements. L Description ACCESS PLANKS Planks manufactured in accordance with the EN 12811 standards. Frame made of structural aluminium. A working area made of 12 mm thickness, damp-proof and anti-slip board. PLAT. TRAMP. M48/D48 2000...

SYS-FAST SCREW JACK CASTERS AND SCREW JACK BASE Swivel casters with a brake system, available for different load capacities. The screw jack base 1.0 m with 2 levers is used for stabilizing towers, mainly combined with brackets or stabilizers composed by a base collar, a ledger and a diagonal brace. Cold galvanized. Description SCREW JACK BASE Ø 36 (1000) 2 levers SCREW JACK HOLDER The jack holders allow holding the casters of the towers to make the lifting operations safely. They connect to the vertical tube of the frame with a clamp and have two handles made of round bars to hold the...

STEEL ROLLING TOWERS CONFIGURATIONS SYS-FAST MAIN FEATURES MAXIMUM WORK HEIGHT WORKING SURFACE AREA WORKING LOAD INSTRUCTION MANUAL SYS-FAST - CHARACTERISTICS (*) Heights with the caster spindle fully extended and, in brackets, the height with the caster spindle fully retracted. OVERVIEW SYS-FAST TOWERS COMPONENT ACCESS PLANK M48/D48 2000 (MD/AL) SCREW JACK HOLDER LADDER WITH HOOKS AND RAILINGS B 3000 SCREW JACK CASTER HE 250 kg (Ø 36)

SYS-FAST PLANK HEIGHTS ACCORDING TO EN 1004-1:2020 HEIGHT OF THE FIRST PLANK Minimum height: There is no minimum height limitation for the first plank. Maximum height: The maximum height allowed for the first plank is 3.4m. Height less than 2m: For a height of the first plank less than 2m, the manufacturer must provide for stable access from the outside. HEIGHT BETWEEN PLANKS Maximum height: The maximum allowed between planks is 2.25m. WORKING PLANK Only one working plank per tower is allowed. The other planks are considered access only. An intermediate plank may be established as a working...

STEEL ROLLING TOWERS

STEEL ROLLING TOWERS

STEEL ROLLING TOWERS ASSEMBLY SEQUENCE - SYS-FAST (MODEL 4-ECO) -Assembly of the second level of frames from the 2 planks positioned in step 1. Avoid accidental disassembly by using the safety pins. -Assembly of the provisional railings on the rosettes of the frames, on both sides. -Assembly of the 2 x 2m diagonal on one of the faces. The brake must be applied to the wheels to prevent them from sliding along the surface on which they rest. The wheel is locked when we press the lever it has towards the ground. To unlock it we will push the lever in the opposite direction. Assembly of the...

SYS-FAST ASSEMBLY SEQUENCE - SYS-FAST (MODEL 5-PLUS) The brake must be applied to the wheels to prevent them from sliding along the surface on which they rest. The wheel is locked when we press the lever it has towards the ground. To unlock it we will push the lever in the opposite direction. After having positioned the planks on the horizontal crossbars of the frame, the anti-lifting safety of the platforms must be put on both ends, to prevent their disassembly and/or accidental overturning. Assembly of the first level: -Insertion of the screw jack caster in the 2m frames (wheels with...

Ctra. Santa Bárbara - La Sénia, km 4,6 Tarragona - Spain Modular Scaffold Ladder Frame Scaffold Sectional Scaffold Access Towers European Frame Scaffold Aluminium Rolling Towers Shoring Towers SHORING TOWER D Façade Scaffold Steel Rolling Towers Stages, Ramps and Grandstands Scaffold Accessories Product manufacturer: Dacame S.L. · Product design: Dacame, S.L. · Graphic design: Dacame, S.L. · Production: Dacame, S.L. The content of this catalogue is protected in its entirety by copyright. It is completely prohibited to copy the images, texts, illustrations and graphic concepts, totally or...