GUARDRAILS
10Pages

SERGEANT TYPE GUARDRAILS They are guardrails preferably intended for edge protection in floor slabs. They have a regulation and tightening system by means of a crank and/or hexagonal nut. The sergeant-type GRs are available with the guardrail supports in Ø35 and Ø32 clamp format. • With regulation system by means of M16 rod and inner nuts. • Grasping system to the floor by means of grippers. The upper gripper’s fluted flatrail ensures a firm hold. 35x35x1.5 • With regulation system by means of M12 rod and inner nuts. • Grasping system to the floor by means of grippers. 35x35x1.5 POST TYPE GUARDRAILS Guardrails classified protection system. The post-type GRs are available with the PT guardrail supports in Ø35 and Ø32 clamp format. GA They allow its assembly on a capsule soaked in concrete or other types of supports. E • Guardrail designed to be soaked concrete using an anchor capsule. • It incorporates three anchors for the positioning of the railings, and one last anchor in an inverted position for the placement of the toeboard.

POST TYPE GUARDRAILS FRENCH SYSTEM 40/40 • Interlocking pin limited by the toeboard support. • Guardrail support available in L-shaped handles or flange with conical wedge for 2 Ø35 or Ø32mm guardrails. Ø40x1.5 GUARDRAIL RESERVE 40/40 W/CLAMP GUARDRAIL RESERVE 40/40 W/CLAMP (GA) 40/25 • Interlocking pin limited by the toeboard support. • Guardrail support available in L-shaped handles or flange with conical wedge for 2 Ø35 or Ø32mm guardrails. Ø40x1.5 GUARDRAIL RESERVE 40/25 W/CLAMP GUARDRAIL RESERVE 40/25 W/CLAMP (GA) • Guardrail support available in L-shaped handles or flange with conical...

PINION GUARDRAILS • The Pinion guardrail allows the establishment of a perimeter edge protection on walls and vertical surfaces. • Positioning and tightening system in vertical surface using M24 rod and 2-wing nut (ZN). 35x35x2 PINION GUARDRAIL WINDOW GUARDRAIL ECO • Intended for edge protection in holes on vertical surfaces. • Its telescopic regulation can cover different widths of doors and windows. • The telescopic system consists of M12 rod and nut. • The Window Plus Guardrail incorporates an external telescopic system with drilled tubes every 85mm to adjust Ø10 (ZN) hook and fix the...

GUARDRAIL SUPPORTS All supports, mounted with a compatible GR, have been successfully tested. They comply with the dimensional and resistance requirements of EN 13374 standard, these assemblies being classifiable as class A edge protection systems. STAIRCASE CLAMP • Articulated support designed to allow edge protection systems to be attached to both staircase slabs and ramps. • Its precise telescopic regulation system is composed of a rotating crank welded to an internal threaded rod. swing tightening • The upper gripper is tiltable and consists of a housing for guardrails and a non-slip...

GUARDRAIL SUPPORTS H20 CLAMP • The H20 clamp allows the installation of post-type edge protection systems with interlocking pins. • The housings, large and small, are designed for spigot guardrails of Ø40 and Ø25 respectively. • The clamp is designed to be fixed in type H20 formwork beams, 20cm high and 8cm base. • The tightening system to the beam is by M10 rod with handle. Ø35x1.5 (external tube) Ø30x1.5 (internal tube) H20 CLAMP (ZN) (Supp. Guard.) ANCHORING CAPSULE • Manufactured by injection with polypropylene copolymer. Its composition makes it resistant to high shocks and tensions. •...

GUARDRAIL SUPPORTS WALL CONSOLES • Designed to establish a work surface on facades and roofs. • The pin located at the end of the upper crossbar allows the side protection to be mounted. Round tube • For its fixing to the wall, it includes a threaded rod and a nut with plate. square tube Wall console examples of use: 2 Guardrail 40 3 Extensible security guardrail 4 Security guardrail - 1000 5 Extensible plank CONV. - 2000

SECURITY GUARDRAILS The guardrail railings allow to establish a perimeter edge protection in slabs. Always combined with guardrails and toeboards. • Manufactured steel. • It has two 15x88 mm slots at both ends for its proper positioning on the guardrail. minL maxL EXTENSIBLE GUARDRAIL • Manufactured steel. • It has two 15x88 mm slots at both ends for its proper positioning on the guardrail. minL maxL • In order to fix its length it has a butterfly nut. Ø40x1.5 COMPONENT GUARDRAIL WITH PLUG • Manufactured with high quality S275 steel. • It has two polypropylene safety plugs on both ends....

SECURITY GUARDRAILS GUARDRAIL “S” • Security guardrail with connecting pin that guarantees a uniform continuity. Ø32x1.5 • It allows to establish a perimeter edge protection, combined with guardrails that act as supports. SECURITY GUARDRAIL 2000 “L” W/TOEBOARD SECURITY GUARDRAIL 3000 “L” W/TOEBOARD The toeboards are designed to prevent objects from falling from the work surface. They are part of the side protection together with the guardrails at 1m and 0.5m. They are manufactured in accordance with the requirements of the EN 13374 standards. WOODEN TOEBOARD • Manufactured using high...

Guardrail Support E - Type I Security Guardrail Wooden toeboard