afety ystems Edge protection

SAFETY DACAME products ensure benefits that allow you to always work safely and guarantee compliance with the highest quality standards in the market. The ISO 9001 Quality Management system has been implemented covering each of our company’s processes, ranging from product design to raw material purchasing and manufacture, as well as commercial and distribution management. DACAME provides a comprehensive service that includes personalised technical advice, tailor-made solutions and the distribution, review and maintenance of products. LEGEND raw material for manufacture Hot-dip galvanised. Coating...

SAFETY CONTENTS CERTIFIED EDGE PROTECTION SYSTEMS MULTIDIRECTIONAL EDGE PROTECTION SYSTEM Components 11 SERGEANT TYPE GUARDRAILS FR / B 12 POST TYPE GUARDRAILS PINION GUARDRAIL WINDOW GUARDRAILS VERTICAL GUARDRAILS GUARDRAIL SUPPORTS Staircase clamp Double guardrail Anchoring capsule Wall consoles SECURITY GUARDRAILS SAFETY NET SYSTEMS FOR “V” TYPE NETS DACAME

SAFETY PRODUCT CERTIFICATION - N MARK OF AENOR Protection against falls at different levels is one of the most important aspects to consider in construction works. There are countless situations in which it is necessary to establish collective protection systems to safeguard the integrity of workers. Nowadays, the VI General Convention on Construction establishes the regulatory framework that provisional edge protection systems must comply with, indicating in its article 181 that the current regulations must be taken into account. European standard EN 13374:2013+A1:2018 “Temporary edge protection...

SAFETY PROVISIONAL EDGE PROTECTION SYSTEMS (PEPS) We manufacture different models of Provisional Edge Protection Systems. We have an extensive range of guardrails, railings and supports among others. All designed to be installed at a construction site allowing users to carry out their work with complete safety, always in accordance with current safety requirements. All our PEPS are manufactured in accordance with EN 13374 standard. DACAME Provisional Edge Protection Systems, examples of use: PEPS “E-1200” with capsule GC “MULTI” with staircase clamp Vertical guardrails Wall console Double guardrail...

SAFETY SYSTEM CLASSIFICATION It is essential to protect workplaces with a risk of falling from height. The Royal Decree 1627/1997 establishes minimum safety conditions related to falls from height at construction sites, demanding protection at slopes, gaps and openings that may pose a risk of falling from a height. Fall height is set at 2m, considering that all workplaces located at a higher height must be protected by prioritising collective protection over individual protection. CLASS USAGE ACCORDING TO INCLINATION AND FALL HEIGHT Work surface inclination Resistance to static loads only: Resistance...

SAFETY CERTIFIED PROVISIONAL EDGE PROTECTION SYSTEMS DACAME edge protection systems: B35, E-1200 and E-1150-14 are classified as CLASS A. CLASS A protection provides resistance to static loads only: - Support for someone leaning on it holding it when walking by it. - Stopping someone walking or falling towards the protection. EN 13374 - CLASS A The inclination of the CLASS A edge protection system must not deviate from the perpendicular to the work surface more than 15° outwards or inwards. The B35 system is ideal for installation on floor slabs of different thicknesses or of varying thickness...

SAFETY COMPONENTS OF THE CERTIFIED SYSTEMS GUARDRAILS With guardrails and toeboards, they allow to establish a perimeter edge protection in slabs. They have anchors for the top guardrail, the intermediate guardrail and the toeboard. All DACAME guardrails are made of S275 GA high quality steel. B35 • With regulation system and telescopic tightening by means of M12 rod and inner nuts. Telescopic regulation • Grasping system to the floor by means of grippers. The upper gripper’s fluted flatrail ensures a firm hold. It incorporates toeboard housing. • Supports with guardrails manufactured with commercial...

SAFETY COMPONENTS OF THE CERTIFIED SYSTEMS • Manufactured steel. • It has two housings at both ends for positioning on the guardrail. minL maxL WOODEN TOEBOARD • Manufactured using high quality tropical wood with coating to ensure greater durability. METAL TOEBOARD • Manufactured metal sheet. ANCHORING CAPSULE Ø • Manufactured by injection with polypropylene copolymer. Its composition makes it resistant to high shocks and tensions. • Designed to be soaked in concrete and to clamp guardrails. • Antiseptic, galvanisable and non-toxic. ANCHOR CAPSULE FOR E GUARDRAIL (intØ 40) PLASTIC PROTECTOR •...

MULTIDIRECTIONAL EDGE PROTECTION SYSTEM The Multidirectional Edge Protection System is classified as a CLASS A system. System characterised by its versatility: The guardrail, as the main element of the system, has supports for the railings that allow them to be mounted in any direction and inclination, always maintaining all the safety conditions. Rotating and tiltable upper support Fixed bottom support Supports for rotating and sliding toeboards Ø40mm and 100mm long interlocking spigot flat inclined

SAFETY MULTIDIRECTIONAL EDGE PROTECTION SYSTEM COMPONENTS • Guardrail clamping system consisting of fixed lower claws and upper rotating and self-locking claws. For guardrails up to Ø35 mm. • Rotating and sliding toeboards clamping system. • Manufactured with high quality S275 steel. • It has two polypropylene safety plugs on both ends. GUARDRAIL WITH PLUG (Ø: 35x2) 2500 (SM) WOODEN TOEBOARD • Manufactured using high quality tropical wood with coating to ensure greater durability. COMPONENT • Manufactured by injection with polypropylene copolymer. Its composition makes it resistant to high shocks...

SERGEANT TYPE GUARDRAILS They are guardrails preferably intended for edge protection in floor slabs. They have a regulation and tightening system by means of a crank and/or hexagonal nut. The sergeant-type GRs are available with the guardrail supports in Ø35 and Ø32 clamp format. • With regulation system by means of M16 rod and inner nuts. • Grasping system to the floor by means of grippers. The upper gripper’s fluted flatrail ensures a firm hold. 35x35x1.5 • With regulation system by means of M12 rod and inner nuts. • Grasping system to the floor by means of grippers. 35x35x1.5 POST TYPE GUARDRAILS...