DINO 48
16Pages

European Scaffolding

EUROPEAN SCAFFOLDING DINO 48 EUROPEAN SCAFFOLDING DINO 48 European Scaffolding is ideal for working on regular façades as it enables high assembly performance, thanks to its simple design and excellent manageability. In addition, it is compatible with the modular MEKA 48 scaffolding. The DINO 48 European Scaffolding is manufactured in compliance with the following European standards: • EN 12810 • EN 12811 DINO 48 European Scaffolding basically consists of frames and walkthru frames which, when connected using planks, handrails and diagonal braces, provide assemblies that are adaptable to...

EUROPEAN SCAFFOLDING NOMENCLATURE SIDE GUARDRAIL SCAFFOLD FRAME WALKTHRU FRAME FIXED STEEL PLANK WALKTHRU FRAME COUPLER SPIGOT ACCESS PLANK SPIGOT WITH COUPLER ACCESS LADDER SIDE GUARDRAIL ACCESSORY ACCESS LADDER SUPPORT CENTRAL GUARDRAIL ACCESSORY TELESCOPIC STABILIZER SCREW JACK BASE

DINO 48 SCREW JACK BASES Made of zinc plated steel. They bear the load of the vertical pipes. The reinforced base plate has a thickness of 5 mm and a surface area of 120 X 120 mm. Ø 36 mm threaded rod available in different lengths. With overlapping space in compliance with the current regulations. The jack base 1000 2 levers is pre-eminently used to stabilise the structure. SCREW JACK BASE Ø 36 (500) SCREW JACK BASE Ø 36 (750) SCREW JACK BASE Ø 36 (1000) SCREW JACK BASE Ø 36 (1000) 2 levers SWIVEL SCREW JACK BASE Accommodates the scaffold on inclined surfaces. SWIVEL JACK BASE Ø 36 (I-600)...

EUROPEAN SCAFFOLDING SCAFFOLD FRAMES These are the basic components of the DINO 48 system. Manufactured with tubes of Ø 48.3 x 3.2 mm thickness, they are fitted with lock pins for assembling the system’s guardrails and diagonal braces. The reinforcements at both top ends make the system extremely rigid. The upper end has spigots for attaching Ø 40 pipes. Both uprights have drill holes at their lower end and in the spigot so that they can be attached with a snap pin. Reinforced at the top ends with a rectangular handrail. SCAFFOLD FRAME DINO 48 2000x 700 SCAFFOLD FRAME DINO 48 2000x 700 (GA)...

DINO 48 GUARDRAIL ACCESSORIES These components are designed to provide the side protection on the top level of planks. Manufactured with tubes of Ø 48.3 x 3.2 mm thickness. Fitted with lock pins to enable handrails and guardrails to be assembled. Available in two finishes: • hot-dip galvanized with a minimum thickness of 75 microns, • epoxy coat. SUPPLEMENT INNER DINO 48 SIDE 1000 (GA) SUPPLEMENT INNER DINO 48 CENTRAL SUPPLEMENT INNER DINO 48 CENTRAL (GA) SUPPLEMENT INNER DINO 48 SIDE 1000 SUPPLEMENT INNER DINO 48 SIDE 700 (GA) COMPONENT SUPPLEMENT INNER DINO 48 SIDE 700 HANDRAILS &...

EUROPEAN SCAFFOLDING INITIATION SUPPORTS Used to connect T4 diagonal braces, using their lock pins. In addition, the plank initiation support enables the ladder support to be assembled or a level of platforms for the ladder to rest on. Bushing height 60 mm. 1 Ladder support Plank level Initiation support planks 60 mm Initiation support diagonal brace COMPONENT INITIATION SUP. PLANK DINO 48 700 INITIATION SUP. PLANK DINO 48 700 (GA) INITIATION SUP. PLANK DINO 48 1000 Available in two finishes: • hot-dip galvanized with a minimum thickness of 75 microns, • epoxy coat. INITIATION SUP. PLANK...

DINO 48 ALUMINIUM DOUBLE TRUSS LEDGERS SYSTEMS ALUMINIUM DOUBLE TRUSS LEDGERS Manufactured with Ø 48x4 mm aluminium pipe, their distinguishing features are their lightweight and ease handling. 2 and 3 m models are available. Through the steel fittings between the trusses and the ends, the system can cover a wide range of lengths. ALUMINIUM DOUBLE TRUSS LEDGER 2.0 m ALUMINIUM DOUBLE TRUSS LEDGER 3.0 m CENTRAL FITTING Manufactured with Ø 38 mm steel pipe, it ensures that the trusses are securely hold together thanks to the 4 M10 screws and nuts. Hot-dip galvanized with a minimum thickness of...

EUROPEAN SCAFFOLDING GUARDRAILS The top guardrail is an alternative to using the handrail for side protection, making the assembly more rigid. The side guardrail is used to cover the gap at the sides of the frames of a width of 70 and 100 cm at both ends. TOP GUARDRAIL DINO 48 2000 TOP GUARDRAIL DINO 48 2000 (GA) TOP GUARDRAIL DINO 48 2500 TOP GUARDRAIL DINO 48 2500 (GA) TOP GUARDRAIL DINO 48 3000 TOP GUARDRAIL DINO 48 3000 (GA) Side guardrail SIDE GUARDRAIL DINO 48 700 SIDE GUARDRAIL DINO 48 700 (GA) Available in two finishes: • hot-dip galvanized with a minimum thickness of 75 microns, •...

DINO 48 FIXED STEEL PLANKS The planks comply with the EN 12811 requirements. An extremely resistant perforated working area manufactured with anti-slip grooves. The 2 welded tubes make them easy to handle. Width: 30 cm. Hot galvanized and with a minimum thickness of 75 microns. Complying with the 12810-2 fall arrest system requirements. FIXED PLANK M48/D48 2000 C-6 (EP) FIXED PLANK M48/D48 2000 C-6 (GA) FIXED PLANK M48/D48 2500 C-4 (EP) GA: galvanized coating (min. thickness 75 microns) FIXED PLANK M48/D48 2500 C-4 (GA) FIXED PLANK M48/D48 3000 C-4 (EP) H: edge height C: load capacity...

EUROPEAN SCAFFOLDING ACCESS LADDER SUPPORT Allows for the first access ladder to be properly inclined without the need of steel planks. Attached to the horizontal brace using a Ø 48 mm coupler. Hot-dip galvanized (with a minimum thickness of 75 microns). ACCESS LADDER SUPPORT (GA) Designed to complete the side protection (guardrail). Made from anti-humidity wood. Metal clamps on both ends. Offering 15 cm of protective height. COMPONENT TIES An indispensable component for securing the scaffolding to the structure's facade. It should be used with an EN 74 Ø 48 coupler. Hook diameter: 18 mm....

DINO 48 STABILIZERS With similar characteristics to the brackets, stabilizers help to prevent small mobile towers and other structures from toppling. Connected using a coupler. Hot-dip galvanized with a minimum thickness of 75 micron. TELESCOPIC STABILIZER Used for scaffolds where tying the structure to a wall is not an option as well as for mobile towers. An articulated base plate allows it to adapt well to the surface. The adjustable telescopic arm can be operated with a snap pin. 2 couplers secure it to the frames. Hot-dip galvanized with a minimum thickness of 75 micron. PROVISIONAL...