Intelligent Online Free Chlorine Analyzer W761 with CC1 Sensor for Swimming Pool Water The Inline Residual Chlorine Analyzer is equipped with German-made CC1 sensor, which adopts a membrane-covered amperometric potentiostatic 3-electrode system with built-in electronics, which measures free chlorine, features automatic temperature compensation, requires no zero-point adjustment, and has highly reduced pH dependence; It is mainly applied to swimming pool water, drinking water, and sea water. In terms of technical characteristics, it offers good measurement stability, practical operation and maintenance, strong environmental adaptability, flexible signal and connection option, and complies with EMC and RoHS standards. Application Fields Swimming pool water, drinking water, sea water (partially tolerates surfactants, suitable for more complex water types than surfactant-intolerant models). Technical Parameters Item Measurement System Membrane-covered amperometric potentiostatic 3-electrode system (built-in electronics) Measurement Range Modbus RTU-Output: 0.05~20.00ppm, resolution 0.01 mg/L; 0.005… 2.000 ppm, resolution 0.001 mg/L; 4-20mA-Output: 0.005~0.500ppm, resolution 0.001 mg/L; 0.05~5.00ppm, resolution 0.01 mg/L; 0.05~10.00ppm, resolution 0.01 mg/L;

0.05~20.00ppm, resolution 0.01 mg/L. Response Time T90: Approximately 2 minutes. Flow Rate 15–30 L/h (15–30 cm/s, small flow dependence) 4–12 (highly reduced pH dependence) ≤0.5 bar (no retaining ring); ≤3 bar (with retaining ring) First Start-Up Time 2 mg/L range: <2% at 0.4 mg/L & 1.6 mg/L (repeatability conditions) Slope Drift ≈ < -3% per month (25°C, pH7.2 in drinking water) Disinfectant Absence Tolerance Microporous hydrophilic membrane, PVC-U, PEEK, stainless steel Protection Class 5-pole M12 plug-on flange (IP68); 2-pole terminal with mA-hood (IP65)