[email protected] Anti-surfactant and anti-pollution Automatic temperature compensation Using the working principle of three-electrode membrane-coated current method With ion selectivity and resistance to mechanical stress Accurate measurement and stable performance Water Quality Analyzer No zero-point calibration, a single point calibration is sufficient • Not affected by pH interference • Data recording, historical query

CHLORINE ANALYZER [email protected] This analyzer is a disinfectant monitor with a microprocessor, equipped with an imported disinfectant sensor, without pH compensation, and has anti-surfactant property. It uses an LCD liquid crystal display screen, with high and low limit alarm prompts and three sets of relay control switches, one-button calibration, automatic temperature compensation, historical data recording and query functions.

Measurement range: 0.0-0.5/2.0/5.0/10.0/ 20.0mg/L Measurement accuracy: <1% (calibrated @ pH=7.2, temperature = 25°C) Resolution: 0.001 Stability: <0.02mg/L/24h pH applicable range: 4-12 Signal output: 4~20mA (load resistance <7500) Three sets of relay control contacts: 3A250VAC, 3A 28VDC or 120VAC Power supply: 220VAC (24VDC optional) Maximum pressure: l.Obar Flow rate: 15-30L/h (in the flow cell) Communication method: MODBUS RS485 communication function Ambient temperature: 0-60°C, relative humidity not more than 90% Enclosure dimensions: 300*250*165mm Enclosure protection level: IP43 Viewing...

Hospital sewage, swimming pool water, tap water, chemical sewage.