1. Catalogs
  2. DABECO Co.,Ltd
  3. Flue Gas Humidity Analyzer DB450N

Flue Gas Humidity Analyzer DB450N

Flue Gas Humidity Analyzer DB450N

Flue Gas Humidity Analyzer DB450N

Product catalog summary
Overview: The DB450N High Temperature In-situ Flue Gas Humidity Analyzer is designed for accurate humidity measurement in hot, wet flue gas environments, suitable for applications such as industrial furnaces and incinerators. It provides real-time data to optimize combustion processes, enhance energy efficiency, and control emissions.
Specifications:
  • Measurement Principle: Capacitance
  • Measurement Range: Volume ratio: 0~40%VOL, Relative humidity: 0~100%RH
  • Resolution: 0.001
  • Accuracy: Less than ±1.5%FS
  • Repeatability: Less than ±1%
  • Response Time: T90 less than 15 seconds
  • Working Temperature: Analyzer: -10~+50℃, Stem: 0~200℃
  • Trace Heating Temperature: 50℃~150℃
  • Sampling Method: Direct insertion
  • Analog Output: 4-20mA.DC, non-isolated output
  • Alarm Output: 2 programmable dry contact type passive alarm outputs
  • Other Interface: RS485
Power and Protection:
  • Power Supply: AC220V±10% 50/60Hz, Consumption less than 15VA
  • Protection: Stem made of 316L stainless steel, Transmitter housing rated IP65
Service Life: Transmitter over 36 months, Sensor over 24 months under normal conditions.
Installation and Dimensions:
  • Sample Gas Components: No flammable or highly corrosive gases
  • Stem Length: Standard lengths of 0.5m, 1.0m, 1.5m, customizable up to 1.8m
  • Installation: Duct, DN65 standard flange
See more

Catalog excerpts

Flue Gas Humidity Analyzer DB450N-1

High Temperature In-situFlue Gas Humidity Analyzerupto 200°C for CEMS The DB450N in-situ flue gas humidity transmitter is designed to accurately measure humidity in hot, wet flue gas environments, eliminating the need for gas sampling and conditioning. This approach provides real-time, accurate humidity data for optimizing combustion processes, ensuring efficient energy use, and controlling emissions. IP65 level housing and 316L stainless steel stem ensure these transmitters are crucial for various working environments with high dust concentration and some chemical pollution, including industrial furnaces, incinerators, and drying processes etc applications. Technical Parameters Measurement principle www.dabeco.com [email protected]

 Open the catalog to page 1

All DABECO Co.,Ltd catalogs and technical brochures

  1. W501-DAS3

    2  Pages

  2. W501-DCL4.2

    2  Pages

  3. W501-DCH10

    2  Pages

  4. W510-DAS3

    2  Pages

  5. W510-DCL4.2

    2  Pages

  6. W510-DCH10

    2  Pages

  7. W761-DCD-4.2

    2  Pages

  8. W761-DCL2.2

    2  Pages

  9. W761-DCC1

    2  Pages

  10. W761-DAS2

    2  Pages

  11. W771-DCD-4.2

    2  Pages

  12. W771-DCL2.2

    2  Pages

  13. W771-DCC1

    2  Pages

  14. W771-DAS2

    2  Pages

  15. W771-DCP4.0

    2  Pages

  16. W771-DCS4

    2  Pages

  17. W510-DCCF1.0

    2  Pages

  18. W501-DWP10.1

    2  Pages

  19. W501-DP10.1

    2  Pages

  20. W501-DOZ10.1

    2  Pages

  21. W501-DCP4.0

    2  Pages

  22. W501-DCD10.1

    2  Pages

  23. W501-DCCF1.0

    2  Pages

  24. W501

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.