*mydirectindustry

Catalogs
DABECO Co.,Ltd
DABECO CH10 High Concentration Chlorine Sensor

DABECO CH10 High Concentration Chlorine Sensor

Product catalog summary

Overview: The CH10 is an indicator for free chlorine, designed for applications with high chlorine concentrations and constant pH levels. It features a mechanically resistant membrane system that is highly resistant to surfactants.

Specifications:

Chlorination Agents: Suitable for NaOCl, Ca(OCl)2, chlorine gas, and chlorine electrolysis with membrane cell.
Measuring System: Membrane-covered, amperometric 2-electrode system with integrated electronics.
Electronic Versions: Analog, digital, and mA versions with varying degrees of galvanic isolation and output signals.
Measuring Range: Sensor slope varies between 65% and 150% of nominal slope, affecting the measuring range.
Temperature: Measuring water temperature 0-45°C, ambient temperature 0-55°C, with automatic temperature compensation.
Pressure: Max working pressure without retaining ring is 0.5 bar; with retaining ring in TARAflow FLC, it is 1 bar.

Operational Details:

Flow Rate: 15-30 l/h in TARAflow FLC.
pH Range: pH 5 to pH 8.
Run-in Time: Approximately 11 hours for first start-up.
Calibration: At the device using DPD-1, iodometry up to 2000 ppm.
Interferences: ClO2, O3, Peracetic acid.
Connection Types: mV, Modbus, and 4-20 mA versions with specific plug-on flange and terminal options.

Maintenance:

Regular signal control at least once a week.
Membrane cap change annually; electrolyte change every 3 months.

Technical Data:

Various models with specific measuring ranges, resolutions, and output types.
Electrical connections include 2-pole terminal clamps and 5-pole M12 plug-on flanges.

Spare Parts:

Membrane cap, electrolyte, emery, and O-ring available as spare parts.

Catalog excerpts

DABECO CH10 High Concentration Chlorine Sensor-1

Data Sheet

Open the catalog to page 1

DABECO CH10 High Concentration Chlorine Sensor-3

Option 1: Retaining ring When operating with pressures >0.5 bar in TARAflow FLC Dimensions retaining ring 29 x 23.4 x 2.5 mm, slitted, PETP Different positions for groove

Open the catalog to page 3

DABECO CH10 High Concentration Chlorine Sensor-4

1. CH10 (Analog output, analog internal signal processing) * concentration tested and approved up to 0.2% (2000 ppm) (Subject to technical changes!)

Open the catalog to page 4

DABECO CH10 High Concentration Chlorine Sensor-5

* concentration tested and approved up to 0.2% (2000 ppm) (Subject to technical changes!)

Open the catalog to page 5

DABECO CH10 High Concentration Chlorine Sensor-6

* concentration tested and approved up to 0.2% (2000 ppm) (Subject to technical changes!)

Open the catalog to page 6

DABECO CH10 High Concentration Chlorine Sensor-7

* concentration tested and approved up to 0.2% (2000 ppm) (Subject to technical changes!)

Open the catalog to page 7

DABECO CH10 High Concentration Chlorine Sensor-8

* concentration tested and approved up to 0.2% (2000 ppm) (Subject to technical changes!)

Open the catalog to page 8

DABECO CH10 High Concentration Chlorine Sensor-9

(Subject to technical changes!)

Open the catalog to page 9

All DABECO Co.,Ltd catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

About DirectIndustry

DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.

Are you a buyer?

Find the right product
Request For Quotation (RFQ)
Our brands
FAQ
Newsletter subscription

Are you a supplier?

Exhibit with us
Our services
Manufacturer account
Distributor Account

About Us

VirtualExpo Group
Our Partners
Recruitment
Testimonials