1. Catalogs
  2. DABECO Co.,Ltd
  3. DABECO CD10.1 Chlorine Dioxide Sensor

DABECO CD10.1 Chlorine Dioxide Sensor

DABECO CD10.1 Chlorine Dioxide Sensor
1 / 10 PagesView full catalog

DABECO CD10.1 Chlorine Dioxide Sensor

Product catalog summary
Overview: The CD10.1 is a chlorine dioxide indicator designed for various water treatment applications, including sea water. It features a mechanically resistant membrane system that is highly resistant to surfactants.
Specifications:
  • Measuring System: Membrane-covered, amperometric 2-electrode system.
  • Electronic Versions: Analog, digital, and mA versions with varying degrees of galvanic isolation and output signals.
  • Measuring Range: Sensor slope varies between 65% and 150% of nominal slope, affecting the measuring range.
  • Temperature: Operating water temperature is 0 to +50°C, with ambient temperature up to +55°C. Temperature compensation is automatic.
  • Pressure: Maximum working pressure is 0.5 bar without a retaining ring and 1.0 bar with a retaining ring in TARAflow FLC.
  • Flow Rate: 15-30 l/h in TARAflow FLC.
  • pH Range: 1 to 12, with decomposition of chlorine dioxide beginning over pH 12.
Performance:
  • Run-in Time: Approximately 1 hour for first start-up.
  • Response Time: T90 is approximately 1 minute.
  • Accuracy: After calibration, accuracy is <1% for 2 ppm range and <0.1% for 20 ppm range.
  • Interferences: Cl2 factor is 0.1, O3 factor is 25.
Maintenance: Regular signal control is recommended at least once a week. Membrane cap should be changed annually, and electrolyte every 3-6 months.
Connections: Various connection options including 5-pole M12 plug-on flange and 2-pole terminal, with maximum cable lengths depending on signal processing type.
Materials: Elastomer membrane, PVC-U, stainless steel 1.4571.
Spare Parts: Includes membrane cap, electrolyte, emery, and O-ring with specific part numbers.
See more

Catalog excerpts

DABECO CD10.1 Chlorine Dioxide Sensor-3

Option 1: Retaining ring When operating with pressures >0.5 bar in TARAflow FLC Dimensions retaining ring 29 x 23.4 x 2.5 mm, slitted, PETP Different positions for groove

 Open the catalog to page 3
DABECO CD10.1 Chlorine Dioxide Sensor-4

Data Sheet January 2025 (EN) V4 Technical Data 1. CD10.1 (Analog output, analog internal signal processing) Measuring range Output Output resistance Nominal slope Voltage supply Galvanic isolation required in the measuring device/controller * Function of wires: PIN1: measuring signal PIN2: +U PIN3: -U PIN4: signal GND PIN5: n. c. 5-pole M12 plug-on flange Function of wires: PIN1: measuring signal PIN2: +U PIN3: power GND PIN4: signal GND PIN5: n. c. * (Subject to technical chang

 Open the catalog to page 4
DABECO CD10.1 Chlorine Dioxide Sensor-5

(Subject to technical changes!)

 Open the catalog to page 5
DABECO CD10.1 Chlorine Dioxide Sensor-6

3. CD10.1 (digital output, digital signal processing) Output resistance There are no terminating resistors in the sensor. Power supply 9-30 VDC approx. 7-30 mA Galvanic isolation required in the measuring device/controller * (Subject to technical changes!)

 Open the catalog to page 6
DABECO CD10.1 Chlorine Dioxide Sensor-7

(Subject to technical changes!)

 Open the catalog to page 7
DABECO CD10.1 Chlorine Dioxide Sensor-8

4.2 Electrical connection: 5 pole M12 plug-on flange Output resistance Nominal slope in mA/ppm Galvanic isolation required in the measuring device/controller * (Subject to technical changes!)

 Open the catalog to page 8
DABECO CD10.1 Chlorine Dioxide Sensor-9

(Subject to technical changes!)

 Open the catalog to page 9
DABECO CD10.1 Chlorine Dioxide Sensor-10

Linearity of TARAtec CD10.1 HMeasurement range 2 ppm Measuring water: tap water / Temperature: 45 C / pH value: 7,2 chlorine dioxide concentration [ppm] TARAtec CD10.1H — — — • real concentration

 Open the catalog to page 10

Archived catalogs

  1. W501

    2  Pages

  2. W501-DCCF1.0

    2  Pages

  3. W501-DCD10.1

    2  Pages

  4. W501-DCP4.0

    2  Pages

  5. W501-DOZ10.1

    2  Pages

  6. W501-DP10.1

    2  Pages

  7. W501-DWP10.1

    2  Pages

  8. W510-DCCF1.0

    2  Pages

  9. W771-DCS4

    2  Pages

  10. W771-DCP4.0

    2  Pages

  11. W771-DAS2

    2  Pages

  12. W771-DCC1

    2  Pages

  13. W771-DCL2.2

    2  Pages

  14. W771-DCD-4.2

    2  Pages

  15. W761-DAS2

    2  Pages

  16. W761-DCC1

    2  Pages

  17. W761-DCL2.2

    2  Pages

  18. W761-DCD-4.2

    2  Pages

  19. W510-DCH10

    2  Pages

  20. W510-DCL4.2

    2  Pages

  21. W510-DAS3

    2  Pages

  22. W501-DCH10

    2  Pages

  23. W501-DCL4.2

    2  Pages

  24. W501-DAS3

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.