FGATURG • One-click calibration, no calibration is required for the first use • Signal output: RS485,4-20mA 7-inch touch screen, clear and intuitive Data recording, historical query function • Built-in temperature compensation • Not affected by pressure and flow rate

[email protected] Water Quality Analyzer PRODUCT OVGRVIGW It is equipped with Swiss-built sensors, featuring high measurement accuracy, fast response time, and low maintenance costs. The analyzer outputs a 4-20 mA standard signal and an RS485 signal, which can be connected to various controllers. According to customer requirements, it can be connected to two -position controllers, time-ratio controllers, non-linear controllers, and classic PID controllers, among others, to form various residual chlorine control systems. It is widely used in industries such as agricultural drinking water and water...

CHLORINE ANALYZER [email protected] One-click calibration, easy installation, and superior protective performance.

Measurement range: 0-5mg/L Measurement accuracy: 0-2mg/L: ^O.lmg/L, the absolute error is ±0.01mg/L; 0.1^X^2mg/L: ±5% of the measurement value or ±0.03mg/L (whichever is larger); 2-5mg/L: ±5% of the measurement value or ±0.25mg/L (whichever is larger) Response time: <30s Repeatability: ±0.02mg/L pH value range: 5-9 Minimum conductivity: lOOps/cm Sample flow rate: 10L/H Maximum pressure: 4bar Operating temperature: 0.1-40°C (no freezing) Display: 7-inch touch screen Output signal: 4-20mA, RS485 Load resistance: ^7500 Environment humidity: ^95% without condensing water Power supply: 220VAC Enclosure...