Test AND M easurem en t A & D's Testing, Measurement & Control Equipment Lineup Judder Testing Machine This testing machine can measure friction characteristics such as temperature, friction force, and sliding speed, and evaluate wet clutch steel plates, friction materials, AFT, and additives. [Specifications] Maximum pressure force: 5 kN, Pressure setting: Any step can be pressurized, Slip speed: 1 to 500 R.P.M, Sliding speed setting: Arbitrary step speed possible, frictional force: 50 N·m , tem perature 200℃, heating method: Indirect/ direct heating, operation pattern: JASOM349, [Industry/ Standard] JASO M349-01, Automatic transmission oil shudder prevention performance test method. Seat/Bed Durab ility Testing M achine This testing machine is a durability testing machine for seats and beds. It can also be used as a compression testing machine. [Specifications] Durability test, Stroke: 0 to 150mm, Large load: 1.5kN, repeat speed: 160 times/ min, measurement point: Can be tested while automatically changing the measurement point of the bed, compression test, test speed 1 to 500 mm/ min, maximum load 2 kN [Industry/ Standard] Sheet/ bed/ mat/ urethane High Ambient Pressure Friction & Wear Testing Machine This testing machine evaluates sliding characteristics in a pressure vessel. You can evaluate the friction characteristics of refrigerants, oils, sliding materials, etc., of compressors, etc. In addition, the friction force can be measured accurately by placing the load cell in the pressure vessel. This testing machine evaluates the surface condition of materials, including sliding surfaces, by measuring frictional force. [Specifications] Maximum pressure force: Up to 8 kN, Rotation speed: Up to 8000 rpm, measurement range: 5 N·m, environmental pressure: Up to 5 MPa [Industry/ Standard] Compressor, oil material [Specifications] Pressurized load range: Variable from 100 g to 5 kg, Friction coefficient measurement range: 0.01 to 1,Sliding distance: Approximately 10.0 to 30.0 mm, sliding speed: 6 to 600 mm/ min.[Industry/ Standards] Sliding objects, painted surfaces, coating films Bearing Friction & Wear Testing Machine Friction Testing Machine (EFM-3 Type) This testing machine evaluates the friction characteristics of radial bearings, etc. Lubricating oil is appplied by adopting a circulation method, enabling heating up to 80℃. A friction testing machine that complies with the JIS K7218 slip wear test method. [Specifications] Pressure force 15 kN, Rotation speed up to 10000 rpm, with printed safety equipment [Industry/ Standards] Radial bearings, lubricating oils, sliding materials Larg e Testin g M achine for W ood Automatic Tensile Testing Machine This testing machine is for performing 3-point and 4-point bending tests on wooden pillars. For easy adjustment between fulcrums, it is equipped with rails attached to the foundation and a trolley for transporting samples. This testing machine is a device for determining the tensile properties of plastics and plastic composites. When the sample is attached to the feeder section, it is automatically measured and tested. Highly accurate elastic modulus measurement is possible. [Specifications] Maximum load: 300 kN, lower fulcrum distance: 400 to 8100 mm, height to fulcrum: Approximately 400 mm, 4-point curve fulcrum distance: 200 to 2700 mm [Industry/ Standard] Test method for wood materials and JIS Z2101 (JAS) wood materials such as pillars and squares. Reciprocating Friction & Wear Testing Machine [Specifications] Maximum pressure force: 5 kN, pressurization setting: Arbitrary step pressurization possible, sliding speed: 1 to 400 / sec, slip speed setting: Arbitrary step speed possible, frictional force: 100/ 200 N switching, temperature measurement: Maximum 3cH (op) [Industry/ Standard] Rigid/ semi-rigid molding resin, JIS K7218, plastic slip wear test method. Semi-automatic Tensile Testing Machine With this testing machine, simply by mounting the sample, the controller of the testing machine applies an appropriate initial load to the sample and automatically installs an extensionmeter between the marked lines, enabling highly reproducible tests. [Specifications] Maximum load: 10 kN, maximum number of tests: 100 pieces, sample mounting method: Pallet or stocker, number of measuring points: Width and thickness 3 points each. [Industry/ Standards] Hard/ semi-hard molding resin, JIS K7161 (ISO 5271) Plastic tensile property test method [Specifications] Maximum pressure force: 10 kN, test speed: 0.05 to 1000 mm/ min. [Industry/ Standard] Tensile test of rubber material, tensile test of plastic material by exchanging factory options JIS K7161 (ISO 0527) elastic modulus measurement. * Appearance and specifications are subject to change without notice for improvement. * Windows 10 Professional is a registered trademark of Microsoft Corporation. Safety Precautions h ttp s://w w w .a a n d d .co .jp 3-23-14, Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013, Japan ● The contents of this catalog are current as of September 2021. TENSILON Universal Test ing Machine

Next Stag e A&D’ s “TENSILON Universal Testing Machine” has been favored by many companies and laboratories and has become a byword for “testing machine”, thanks to its use of the best technology available at the time in the fields of “force sensor technology” and “measurement/ control technology” used in connecting sensors to machines. History A&D's “TENSILON Universal Testing Machine" has been around for 60 years since its creation as the first load cell type Universal Testing Machine in Japan. It incorporated the latest electrical components and control technology of the time. Since then,...

The "Tensilon RTH Series" retains the functions of the well-established conventional models. It also retains the specifications of the standard models, such as a testing machine grade of 0.5, ultra-high precision measurement with extremely high frame rigidity, and improved operability. The mission of the trusted brand "Tensilon" is to continue to evolve. The RTH series, which has matured further , aims to embody the next era of testing machines. Lineup of High Precision and Standard Precision models RTH SERIES Test Force Accuracy High Stan dard Speed range Return speed Wider speed range RTH Increased...