Catalogs >
A&D COMPANY, LIMITED >
Data Acquisition System Omniace

Data Acquisition System Omniace
16Pages

Catalog excerpts

DATA ACQUISITION SYSTEM Measurement by Anyone, Anywhere …Clearly a Better Value

| RA2300MKII The RA2300MKII(-S)/RA2800A Omniace is a data acquisition device that enables you to acquire/record data with simple operation. Reduced condition setting time and easy measurement can be realized by virtual amplifier settings, a touch-panel and dynamic waveform display on a large LCD. The RA2300MKII(-S)/RA2800A features with various measuring modes such as HD Recorder (for long-term recording on an internal HDD*1) or Memory Recorder (for fast-speed event recording). Direct sensor inputs up to 32 channels (16 slots) are available for RA2800A and 16 digital input channels...

Open the catalog to page 2

Supporting Measurement at Various Fields (Operation & Displays) I Dynamic Waveform Display This system has large 12.1 inch LCD and shows dynamic waveforms. Displaying number and dividing waveforms are voluntarily settable so that various waveforms to every application are available. RA2300MKII(-S) Numerical value + amp setup display RA2800A Image of divided waveforms and vertical scroll I Easy Operation with Rich Features Setup displays with virtual mechanical switch or jog dial allows users to understand input amplifier settings easily. By using both 12.1” large LCD and the touch panel,...

Open the catalog to page 3

Users can easily select from five (5) Measurement Modes - Pen Recorder mode for real time strip chart recording, HD Recorder mode for long term recording of data to a HDD, X-Y Recorder mode for displaying/recording X-Y correlation of two signals, a Multi Recorder mode captures transients while recording steady-state signals, and a Memory Recorder mode for recording fast events. The "Pen Recorder” is a measuring mode with simple operation of pen recorders. The waveforms are displayed with "moving nib” images. Also, like pen recorders, amplifier and paper feeding speed* can be setup on the...

Open the catalog to page 4

This mode is for recording fast events with internal memories*1. Unused memories can be utilized, so maximum of 32MW is available for memory recording if used only one channel. Measurements under various conditions are also possible by using many trigger functions. *1 RA2300MKII(-S) memory : fastest 1ps by 2MW/CH RA2800A memory : fastest 2ps by 1MW/CH • Trigger Mode trigger level. WINDOW : — Activates if signal of selected channel(s) reaches preset level (IN) or gets out of it (OUT). • Pre-trigger (Memory recorder mode only) Data before the trigger point can be recorded to memory. Data...

Open the catalog to page 5

• High speed* and high resolution (80 dots/mm at 25mm/s) recording is available. • Customizable waveform division & printing size. • Location and amplitude of digital signals can be changed by 8 channels. Patented: Patent No. 3605738 *Paper-feed speed of RA2300MKII(-S) is max 100mm/s and that of RA2800A is max 50mm/s. • Auto Scaling Scales can be printed after waveforms. Measuring information • Waveform Division One to sixteen divisions can be selected to display or print out. Users can print waveform at selected width (10 mm to 200 mm). CHART 3 P E E D = 1 OOmm^s (O. 1 OOs/'d I v) Data...

Open the catalog to page 6

Thumbnail Bar Jump Search Level Cursors File Conversion to Support Analysis■ Easy Search of Large Data Below functions are available for searching long-term and large data easily. • Thumbnail Bar : This function displays a waveform image (one selected channel) of recorded data on a thumbnail bar. It does not only allow users to see whole waveform image easily but to get enlarged by touching. Enlarged Image on the Monitor Replay Monitor • Four Jump Search Modes ■ Event... Move to marked event ■ Time. Move to specified time ■ Address (Time). Move to elapsed time from start ■ Max/Min......

Open the catalog to page 7

This PC application software enables the user to remotely program set-up configurations, record data, make arithmetic computations, and analyze data. ♦ Remote Control Feature Remotely control all RA series units via Ethernet. Control mainframe data acquisition functions, signal conditioning amplifiers, IR thermal imager and NEC-ATI approved A/D boards and visible light cameras. ♦ Multiple Mathematic Operations and FFT Analysis Perform arithmetic operations, function operations and FFT analysis on real time and recorded data. ♦ User Defined Monitor Display Monitor display of Digital, Y-T &...

Open the catalog to page 8

I Multiple Unit Synchronization – Model RA28-132 (Model RA2800A units only) The Model RA28-132 Synchronization option allows multi-channel memory recording among multiple connected Model RA2800A units. Up to 10 units can be daisy chain connected to expand channel capacity to 320 channels. One unit is a master and the others are slaves. All recorded data is time synchronized with the sampling clock of the master unit. The high speed, multi-channel time synchronized data recorded by the RA2800A master and slave units is also simultaneously triggered. The trigger signal to simultaneously start...

Open the catalog to page 9

Input Signal High current Medium current Low current Input Unit Selection Block Diagram Probes and Cables BNC-safety jacks adapter (0243-3021) BNC-safety jacks adapter (0243-3021) This unit detects AC or DC voltage and outputs as High/Low. It supports 4 channels 50 to 150 VAC: Low 10O to 250 VAC: High UW Thermocouple R, T, J, K, andW* «W can only be used in AP11-106A. Covered and seathed thermocouples Input Signal Strain gauge Strain gauge sensors: Load cell, pressure transducer, displacement transducer, torque transducer, slip ring and accelerometer Strain, load,...

Open the catalog to page 10

■ Measuring Mode (Acquisition/Recording) Specifications X-Y Recorder Axis Setting ON/OFF of locas enabled (pen up & down) Input signal monitor, freeze, copy and X-Y display during data recording available. X-axis : 1 channel, Y-axis : 3 channels Measuring Speed Data Recording | Function | Record all input signals (for channels with input ON in the amp setting display) on HD* X-Y Waveform Printing (Printout) *1 Event unit (RA23-145, RA23-145A) The difference of unit style is only standard cables (0311-5252 or RA23-127) . Units have same spacifications. Regardless of styles, "RA23-145" is...

Open the catalog to page 11