Premium-Level Semi-Micro/Analytical Balances certified Superior Weighing, Without Compromise Discover Precision

Where Quality Drives Daily Performance Designed for professionals who demand precision, compliance, and efficiency, the BH-T/BH series delivers superior accuracy with advanced sensor technology. Automatic doors, a sleek touchscreen, and intuitive navigation streamline your workflow—saving time and reducing risk. For those who seek excellence in every detail, the BH-T/BH series is the tool that delivers. Two product lines, tailored to your needs Equipped with a vibrant 5-inch color touchscreen, the BH-T series offers maximum operability, enhanced functionality, and a broader range of solutions for...

Door handle Simply connect the handle of the door you wish to open/close automatically to the sliding arm below using the latch on the arm. Sliding arm (with latch) The arm moves automatically when triggered by one of the IR sensors on the display unit (or an optional foot switch). The opening distance can be set to full, half, or a user-defined position. The sensitivity of the IR sensors is adjustable to three levels. For the BH-T series, the IR sensors can also be used for contactless activation of the RE-ZERO or PRINT command, as an alternative to controlling the automatic door(s). •• Touch...

Engineered design for quick and effortless balance cleaning Each glass pane of the breeze break (including the rear panel), as well as the floor plate, can be easily detached for thorough cleaning/disinfection, thanks to the unique clip system. In addition, the side doors are suspended from the top rather than sliding along grooves, preventing the accumulation of dust/contaminants and making the area much easier to clean.♦ ♦ Patented For the BH-T/BH series, two sizes of brushes are provided as standard for daily cleaning, supporting prolonged maintenance of the balance. Groove-free side door design...

Quick on-site performance test The balance can quickly assess repeatability (standard deviation) using its internal weight, allowing performance evaluation under actual operating conditions. In the BH-T series, the repeatability measurement mode is instantly accessible by pressing [P-TEST] on the screen. This mode supports testing with an external weight as well as the internal weight. Impact shock detection (ISD) The ISD function detects impact loads on the weight sensor and displays their intensity in five levels (0– 4). Levels 3 and 4 also trigger an audible alert. This helps you reduce future...

✔Application-specific functions that simplify your work Formulation mode (for the BH-T series) The formulation mode enables quick, accurate weighing of multiple samples to mix according to a set recipe, allowing you to set a target value (g) and tolerance (%) for each sample. Up to 150 samples and 300 recipes can be registered in the balance for easy creation or selection/change of recipes. Mixture Sample Weighing screen in formulation mode Instructions prompt you to weigh each sample within its target range. The [SAVE] key to proceed to the next step activates only when the weight is within range,...

Beyond measurement—confidence through control ✔ Daily/periodic balance check support (for the BH-T series) The balance supports both daily and periodic balance checks, helping you implement standard operating procedures (SOPs) for quality and performance verification with ease. A daily check ensures that the balance is in good condition, whereas a periodic check evaluates its basic performance over time. No comprehensive knowledge or experience is required to implement these checks. All you need to do is follow the displayed procedures step-by-step (or skip items that are not needed for your laboratory)....

To ensure that the measured sample amount meets the minimum weight requirement, the balance can display an alert continuously until the sample amount reaches the set minimum weight. It is also possible to configure the balance to prevent output of weighing data that falls below the minimum weight. Minimum weight alert You can choose whether to include values near zero when comparing measurements against the minimum weight. Advanced user access control (for the BH-T series*7 ) To prevent unauthorized changes to balance settings/data, users can be assigned to one of four access levels: administrator,...

GLP custom output mode (for the BH-T series*10 ) The GLP custom output mode provides flexible customization of GxP-compliant data output. You can create reusable templates for headers, bodies, and footers, tailoring both content and sequence to your specific needs. Once set up, these templates significantly enhance efficiency and convenience in routine workflows. predefined GxP-compliant output function *10 isA available for both the BH and BH-T series. Selecting a template for GLP custom output Label output mode (for the BH-T series) The label output mode enables connection to a ZPL®/ZPL II®-compatible...

*i The mass of the internal weight may change over time due to on-site environmental conditions and/or degradation with age. *ii Either tael (Singapore/HK jewelry/Taiwan) or tola can be added upon request. *iii Smart range function: Automatically switches between the precision and standard ranges. Changes back to full precision range when the RE-ZERO (tare) operation is implemented. *iv Repeatability can worsen depending on the environmental conditions and operator skills. *v Pursuant to the United States Pharmacopeia (USP), Chapter 41 *vi Certain functions are only available in English and Japanese....

Anti-vibration table for balances Tabletop breeze break (large) External ionizer Also provided as standard for the BH-T series Electrostatic field meter Weighing environment logger Weighing data logger Compact printer Display cover for the BH-T series (5 pcs) Display cover for the BH series (5 pcs) Discharge electrode units for the ionizer (a set of 4 pcs) Sample cup holder set (antistatic) Can be added to the ionizer if you prefer not to put a hand or sample close to the IR sensor of the ionizer. Foot switch for PRINT (with connector) Foot switch for RE-ZERO (with connector) Foot switches Demonstration...