AD-4541-V/I Ultra-slim analog signal conditioners

Product catalog summary

Overview: The AD-4541-V and AD-4541-I are analog signal conditioners designed to convert signals from bridge-type sensors, such as load cells and pressure sensors, into voltage or current outputs. The AD-4541-V provides a voltage output of -2V to +2V, while the AD-4541-I offers a current output of 4-20mA.

Specifications:

Input Range: -3.2 mV/V to +3.2 mV/V
Zero Adjustment Range: ±0.5 mV/V
Span Adjustment Range: 0.4 mV/V to 3.2 mV/V
Non-linearity: 0.05% of F.S. typical
Load Cell Excitation: 5 VDC, 60 mA max
Temperature Coefficients: Zero: 2µV/°C RTI typical, Span: 200ppm/°C typical
Frequency Response: DC to 2 Hz (-3dB)
Response Time: Approx. 190 ms (0% to 90%)
Input Noise: 2µVp-p RTI typical (0.1Hz to 10Hz)

Output:

Voltage Output (AD-4541-V): -2 V to +2 V (Load 2kΩ or higher)
Current Output (AD-4541-I): 4 mA to 20 mA (Load 250Ω or lower)

Power Requirements: 24 VDC ±10%–15%, 100 mA max (Approx. 2.4W)

Environmental Conditions:

Operating Temperature: -5°C to +50°C
Operating Humidity: 85%RH or lower (No condensation)
Storage Temperature: -20°C to +70°C

Physical Characteristics:

Dimensions: 45W x 122H x 24D mm
Mass: Approx. 90 g
Installation: DIN rail or screw
Material: PBT (V0)

Additional Features:

Ultra-slim, lightweight, and easy-to-install design
Calibration via ZERO/SPAN volume controls or CAL switch
Spring clamp terminal block for easy wiring

Accessories: Includes a flathead screwdriver and an instruction manual.

Catalog excerpts

AD-4541-V/I Ultra-slim analog signal conditioners-1

The AD-4541-V and AD-4541-I analog signal conditioners can convert the signal received from a bridge type sensor such as a load cell, pressure sensor, strain gauge, etc. to a voltage output (AD-4541-V / -2V to +2V) or a current output (AD-4541-I / 4-20mA).

Open the catalog to page 1

AD-4541-V/I Ultra-slim analog signal conditioners-2

Category Input Output Power General Others Item Input range Zero adjustment range Span adjustment range Non-linearity Load cell excitation Zero temperature coefficient Span temperature coefficient Frequency response Response Input noise Calibration standard Voltage output (AD-4541-V) Current output (AD-4541-I) Voltage Current Operating temperature Operating humidity Storage temperature External dimensions Mass Terminal Installation Material (Body) Isolation Insulation resistance Accessories Description –3.2 mV/V to +3.2 mV/V –0.5 mV/V to +0.5 mV/V 0.4 mV/V to 3.2 mV/V 0.05% of F.S. typ. 5 VDC...

Open the catalog to page 2