AD-4329A
4Pages

Catalog excerpts

Weighing Indicator

Weighing Indicator  Standard RS-232C Interface  4-point digital linearization across the full span  Triple ranges for weighing capacity are available  Comparator output to an optional relay  Vacuum fluorescent display Hidden behind the cover on the front panel. Enter the calibration mode/CF functions settings. OPR/STB PRESET TARE M+ MODE Turns display On/Off. The load cell is still powered when the display is off. Sets the preset tare weight. Accumulates the displayed weighing value. Displays and clears the accumulated weighing values. Used in calibration. NET/B/G NET GROSS 0 ZERO T...

Open the catalog to page 2

Your Best Solution Best Price Performance for your various applications Platform Scale Truck Scale Packer Scale Relay output • Near Zero • Prelim • Target • Free Fall Hopper Scale Relay output • Near Zero • Prelim • Target • Free Fall Comparator output (Hi/OK/Lo) Rear Panel View 1. Standard RS-232C interface. Optional BCD (OP-01), RS-422/485 (OP-03) or analog output 4 -20mA (OP-07) 2. Optional comparator output (OP-02) 3. External control input 4. Standard current lo

Open the catalog to page 3

AD-4329A Weighing Indicator Physical Dimensions Unit : mm / inches Front View Side View Specifications Input Sensitivity Input Signal Range Load Cell Excitation Load Cell Drive Capacity Zero Temperature Coefficient Span Temperature Coefficient Non-Linearity Maximum Input Noise Input Impedance A/D Conversion Method A/D Internal Resolution Maximum Display Resolution A/D Conversion Rate Weight Display Annunciator Standard Serial Interface 0.15µV/d (min.) —35mV to +35mV 5V DC ±5%, 120mA Up to 8 units of load cells at 350Ω Up to 16 units of load cells at 800Ω (LCC07/LCC11/LCC12) ±0.02µV/ºC typ....

Open the catalog to page 4