*mydirectindustry

DRACO

Product catalog summary

Overview: The document describes the DRACO shrink fit machine, a device for magnetic induction shrinking of tools. It is designed to be user-friendly, quick, and cost-effective, ensuring high precision, strong clamping force, and minimal run-out without permanent magnetization.

Main Features: The machine includes an induction coil for fitting HM or HSS tools and extensions, with an application range from ø 3 to ø 32 mm in h6 tolerance. It features a 7” touch-display and a new intuitive software interface. The automatic shrink-fit cycles have a heating time of 3 to 6 seconds and a cooling time of 150 to 300 seconds.

Procedure: The procedure involves placing the tool-holder in the support base, selecting the tool type and size, moving the coil to touch the retainer ring, starting the heating cycle, inserting the tool, moving the coil up, fitting the air cooling adapter, and starting the cooling cycle.

Technical Data: The machine operates at 14 kW power, 400 V / 50 Hz / 20 A voltage, and weighs 40 kg. It supports tool diameters of 3 – 32 mm for HM and 6 – 32 mm for HSS, with a maximum tool-holder length of 350 mm.

Standard Accessories: Includes a main switch, retractable handles, induction coil, manual handling handle, interchangeable adapters for chucks, support and cooling base, control panel with touch-display, cooling adapter, tool holder adapter, retaining ring, heat-resistant gloves, and cooling extension.

Contact Information: D’ANDREA S.p.A., Via Garbagnate, 71, 20020 Lainate (MI) Italy, Phone: +39 02.937532.1, Fax: +39 02.93753240, Email: [email protected], Website: www.dandrea.com

Catalog excerpts

DRACO MACCHINA PER CALETTAMENTO TERMICO SHRINK FIT MACHINE TECHNOLOGY FOR HIGH PRECISION

Open the catalog to page 1

| DRACO è la nuova apparecchiatura per il calettamento a induzione magnetica per utensili | La macchina è concepita per essere semplice, veloce ed economica | Garantisce elevata precisione, maggiore forza di serraggio ed eccellente concentricità, senza alcuna magnetizzazione residua | | DRACO is the new device for magnetic induction shrinking of tools | It is designed to be easy-to-use, quick and cost-effective | It assures high precision, higher clamping force and very low run-out, without any permanent magnetization | C A R AT T E R I S T I C H E P R I N C I PA L I M A I N F E AT U R E S |...

Open the catalog to page 2

Open the catalog to page 3

MONOd’CT MANDRINI A CALETTAMENTO TERMICO SHRINK FIT CHUCKS HSK-A63 PROLUNGHE A CALETTAMENTO TERMICO SHRINK FIT EXTENSIONS PROLUNGHE A CALETTAMENTO TERMICO A REGOLAZIONE ASSIALE SHRINK FIT EXTENSIONS WITH AXIAL ADJUSTMENT D'ANDREA S.p.A. - Via Garbagnate, 71 - 20020 Lainate (MI) Italy - t. +39 02.937532.1 - f. +39 02.93753240 - [email protected] - www.dandrea.com

Open the catalog to page 4

DRACO

DRACO

Catalog excerpts

All D'Andrea S.p.A. catalogs and technical brochures

Archived catalogs