CZ0878n/LED Explosion-proof floodlight light fittings (street light fittings)
4Pages

floodlight light fittings (street light fittings) The enclosures of LED explosion-proof floodlight fittings are manufactured of die-cast aluminum alloy, with epoxy resin powder sprayed on the surfaces. Therefore, they have good anti-corrosion performance. The transparent shield is made by the toughened glass borosilicate, and the exposed fasteners are made of stainless steel. Explosion -proof light fitting's terminal box bottom entry, is suitable for rubber-coated and the armored cable wiring. The internationally certified PHOENIX cage type terminals are selected as the internal terminals, which are convenient for wiring. Cree LED pellets inside form light source modules through professional optics distribution. Heat disposal which is designed with thermology analysis and the heat-conducting structure of specially made aluminum base board ensure good operational heat release . It can satisfy the related requirements of illumination in petrochemical, chemical and marine industries. Explosion-proof light fittings can be sorted as: floodlight type lamp and street type lamp. • It is energy-saving and environmental protection which the power consumption is only 19% of the same brightness • It is long life and maintenance-free which the service life is up to 50000 hours and the maintenance-free of long term. • There is a feature of good electromagnetic compatibility and it does not cause interference to the system power grid. • It is not influenced by the voltage fluctuations and can be operated in the wide voltage range of 200 ~ 240V AC. • There is a good performance of vibration due to the LED is the solid-state light source. • There is a wide range of ambient temperature, which can be operated in the ambient temperature range of -40t; ~ +55CC. • It is convenient to be mounted and maintained. Zone 2 Zone 21 and zone 22

floodlight light fittings (street light fittings) • Main technical data: Certification | Ex mark Meet the standard IECEx Ex nR II C T* Gc ExtbfflCT*-C Db (In certification ) Intended use: Can be used in zone 2, Can be used in zone 21 and zone 22 Terminal: LI, N cage type terminal 2-2.5mm", PE terminal: 2 x 10mm Cable entry: (Standard configuration)Moulded plastic 1 x M25 x 1.5, Moulded plastic 1 x M25 x 1.5 stopping plug Order specifications: Light source B—Floodlight type lamp Temperature class* F—Street type lamp • Code of cable gland The mounting ways of the light fittings B—Floodlight...

floodlight light fittings (street light fittings) • The order specification of explosion-proof terminal box Lamp pole of single ami Lamp pole of double amis with equal length The height of lamp lole • CZ0930 The order specification of explosion-proof terminal box Lamp pole of double amis with non-equal length CHD+D Single lamp Armoured cable Double lamps cable Armoured cable Cable entries The number of inlets The number of outlets Moulded plastic cable gland Brass cable gland Moulded plastic cable gland Brass cable gland Moulded plastic cable gland Brass cable gland Moulded plastic cable...

floodlight light fittings (street light fittings) • Mounting ways and outline dimensions: The diagram of the lamp pole Explosion-proof terminal boxes • Base diagram: This base diagram is used for the lamp hole with height less than 10 meters. Foundation bolt Pre-embedded framework Steel pipe used for wiring Stone layer