Overview
Cym Materiales SA specializes in manufacturing continuous flow equipment for shot blasting various materials such as welded structural shapes, profiles, bars, plates, steel strips, and pipes. The equipment is tailored to meet specific customer needs, utilizing centrifugal turbines to propel abrasives.

Equipment Models and Specifications
The document outlines different models of blast cleaning machines, including the PER and CH lines, where blast wheels are positioned at 90 degrees to the parts pass-line, and the EST line, where wheels are set at various angles. Key specifications include:

• Pass size sections ranging from 150 mm to 1500 mm in width and 300 mm to 3000 mm in height.
• Production speeds vary from 0.4 to 18 meters per minute, depending on the model.
• Horsepower requirements range from 7.5 to 50 HP.

Conveyor Systems
The machines use either a parallel roller bed or an overhead rail conveyor to continuously introduce parts into the blasting chamber. Some models include in-line painting capabilities to reduce secondary handling costs.

Advantages of Wheel Blast Machines

• Higher production volume with minimized operating costs.
• Consistent finish quality of processed pieces.
• Automated process that does not require skilled labor.
• Safe operation with no health risks or facility damage.
• Environmentally friendly with no pollution.

Customization
The maximum parts pass size section and production speed can be customized to meet precise customer requirements.

Contact Information
CYM MATERIALES S.A.
Brigadier Estanislao Lopez Nº 6, (S2108AIB) Soldini - Santa Fe - Argentina
Phone: (54-341) 490-1100 / Fax: (54-341)490-1366
Website: www.cym.com.ar / Email: [email protected]