Catalogs >
Cyberbond >
Titan 7569

Titan 7569
2Pages

Catalog excerpts

TECHNICAL DATA SHEET Titan 7569 is a single component anaerobic threadlocking adhesive. It is designed for the locking and sealing of metal pipes and fittings. Titan 7569 is suitable for applications where disassembly with hand tools is required for servicing. Physical Properties - Monomer (Uncured) Base Compound Appearance Viscosity Gap Fill Specific Gravity Flash Point Shelf Life Storage Condition RoHS-Compliant Dimethacrylate Ester Brown liquid 500 +/- 200 cps ASTM D 5363; Group 1, Class 6, Grade 2 Solvent Resistance Solvent Alcohol Ester (aromatic) Locking Strength Service Temp Range Full Cure Time Ketone (aromatic) Acetone, Benzophenone Aliphatic hydrocarbon ( lk ) Aromatic Benzyl, Toluol, Xylol Halogenated hydrocarbons Methylenchloride, Chloroform, Chlorobenzol Weak aqueous acid Brown liquid Low -65 to 300 °F 24 hours Petrol, Heptanes, Hexane Nitrite, muriatic acid, + + + (– – – if sulphuric acid, phosphoric concentrated) acid Weak aqueous base sodium hydroxide solution, caustic potash Physical Properties - Polymer (Cured) Appearance Example Ethanol, Methanol Ethylacetate Performance of Cured Adhesive inch-pounds Newton meters Breakaway Torque Prevailing Torque Setting Time / Full Cure Time* 25 25 30 30 Steel Brass Zn Dichromate Stainless Steel minutes minutes minutes minutes General Instructions Surfaces to be bonded should be clean and dry and free of grease. Product should be applied in enough quantity to fill all engaged threads. The product performs best in thin bond gaps. Very large gaps may create gaps that will affect the cure speed and overall strength. Good contact is essential. An adequate bond develops in 15 to 45 minutes and maximum strength is attained in 24 hours. This product is not recommended for use in pure oxygen environments and/or oxygen-rich systems and should not be slected as a sealant for chlorine or other strong oxidizing materials. This product is not designed for plastics, particularly thermoplastics where stress cracking of the plastic could result. It is recommended to comfirm compatibility of the product with all substrates prior to use. Stainless Steel Zn Dichromate Brass Steel The rate of cure will depend on environmental conditions and the substrates used.

Open the catalog to page 1

Storage Products should be stored unopened in a cool, dry place out of direct sunlight. Products may be refrigerated for improved shelf life, but should be brought back to room temperature before use. The data contained herein are furnished for information only and are believed to be reliable. Cyberbond cannot assume responsibility for the results obtained by others over whose method Cyberbond does not control. It is the user’s responsibility to determine suitability for the product or of any production methods mentioned herein and to adopt such precautions as may be advisable for the...

Open the catalog to page 2