TECHNICAL DATA SHEET Titan 7567 is a single component anaerobic pipe sealant with PTFE, designed for the locking and sealing of metal pipes and fittings. It provides immediate low pressure sealing performance on tapered pipe threads. Physical Properties - Monomer (Uncured) Base Compound Appearance Viscosity Dimethacrylate Ester Off-white Paste 540,000 +/- 260,000 cps Heat Aging (aged at temp indicated and tested @ 22°C) Gap Fill Specific Gravity Flash Point Shelf Life Storage Condition RoHS-Compliant Physical Properties - Polymer (Cured) Appearance Locking Strength Service Temp Range Full Cure Time Pin/Collar Strength Off-White Solid Low -65 to 400 °F 24 hours 450 psi 3.10 N/mm2 Performance of Cured Adhesive Solvent Resistance Newton meters Breakaway Torque Prevailing Torque Solvent Alcohol Ester (aromatic) Setting Time / Full Cure Time* Aliphatic hydrocarbon ( lk ) Aromatic Ethanol, Methanol Ketone (aromatic) Acetone, Benzophenone minutes minutes minutes minutes Stainless Steel Zn Dichromate Brass Steel Methylenchloride, Chloroform, Chlorobenzol Nitrite, muriatic acid, sulphuric acid, phosphoric acid sodium hydroxide solution, caustic potash Benzyl, Toluol, Xylol Halogenated hydrocarbons Weak aqueous base Petrol, Heptanes, Hexane Weak aqueous acid Steel Brass Zn Dichromate Stainless Steel

General Instructions Surfaces to be bonded should be clean and dry and free of grease. Product should be applied in enough quantity to fill all engaged threads. The product performs best in thin bond gaps. Very large gaps may create gaps that will affect the cure speed and overall strength. Good contact is essential. An adequate bond develops in 15 to 45 minutes and maximum strength is attained in 24 hours. This product is not recommended for use in pure oxygen environments and/or oxygen-rich systems and should not be slected as a sealant for chlorine or other strong oxidizing materials. This...