Base: - Modified acrylate, one-part, solvent-free Curing: - By UV-light in the wavelength range from 315 to 400 nm Curing parameter: - Depending on thickness and absorption of material involved, thickness of adhesive layer, type of lamp and distance of lamp from adhesive layer Use: - Ideal for glass/glass and glass/metal bonds, not suitable for plastic bonds Application: - Supplied ready to use and best applied from the original container or with Cyberbond recommended dispensing units - Surfaces to be bonded should be dry, free of dust, grease, and other contaminants Technical data Color colorless clear > Cured in 0.1 mm layer thickness Density [g/cm] 1.01 > At room temperature Viscosity [mPas] 100 > At 23ӰC Brookfield sp./rot. 3/100 Tensile strength [MPa] 16 > DIN 53504 Elongation at tear [%] 90 > DIN 53504 Page 1 of 2 size="-1">

Joint part material glass/glass [MPa] > Joint part material glass/Al [MPa] > After delivery in unopened original container At room temperature > NOTE The data contained herein are furnished for information only and are believed to be reliable. Cyberbond L.L.C. cannot assume responsibility for the results obtained by others over whose method Cyberbond L.L.C. does not control. It is the users responsibility to determine suitability for the product or of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against...