Base: - Two part epoxy resin Curing: - At room temperature - Higher temperatures accelerate curing Use: - High strength structural adhesive - Universal use - Checked on biocompatibility and fulfills the requirements of USP XXII, Class VI - Complies with KTW recommendations (plastics in field of drinking water) for hot and cold water (up to 90C) Application: - Components A and B have to be well mixed resp. homogenized in the mixing ratio indicated below - Supplied ready to use and best applied from original containers - Especially advantageous processing with the ATUOMIX System - Surfaces to be bonded must be dry, free of dust and grease as well as other contaminants Technical data Filler Minerals Mixing Ratio (A:B) by weight 5 : 6 (A:B) by volume 1 : 1 Color Grey Density [g/cm] 1.33 > at room temperature Viscosity > at 23ӰC Brookfield Component A (mPas) 100,000 thix Component B (mPas) 130,000 thix Mixture (mPas) 100,000 thix Pot life Water absorption (%) 0.1 In 100 g preparation at 23C (min) 60 > DIN 53495, 24h at RT Gelling Time Coefficient of elongation (1/K) 60xE-6 In 100 g preparation at 23C (min) 90 > acc to DIN 16946 Curing Time Shore Hardness D 80 > Page 1 of 2 size="-1">

After delivery at room temperature > in unopened original container DIN 53455 > NOTE The data contained herein are furnished for information only and are believed to be reliable. Cyberbond L.L.C. cannot assume responsibility for the results obtained by others over whose method Cyberbond L.L.C. does not control. It is the users responsibility to determine suitability for the product or of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof....