Apollo Z-574
Apollo Z-574
- Base Compound: Modified Ethyl
- Appearance: Clear
- Viscosity: Not specified
- Specific Gravity: 1.06 g/cc
- Flash Point: 80°C/176°F
- Shelf Life: 12 months
- Storage Condition: 20°C/68°F
- RoHS-Compliant: Yes
- Full Cure Time: Not specified
- Appearance: Clear
- Service Temperature Range: -55 to 95°C (-67 to 203°F)
- Setting Time: Varies by substrate (Steel, ABS, EPDM)
- Substrates include Steel, Rubber, AL, PC, PVC, ABS
- Performance varies by substrate and conditions
- Apollo Z 574: Single component, low to medium viscosity ethyl cyanoacrylate adhesive
- Suitable for bonding TPO and TPV rubber compounds, and rubber to metal bonding
- Resistant to various solvents including alcohols and weak aqueous acids
- Not resistant to concentrated acids, acetone, and certain hydrocarbons
- Surfaces should be clean and dry before application
- Apply a thin film and press parts together firmly
- Maximum strength is attained in 24 hours
- Store products in a cool, dry place away from direct sunlight
- Data provided for informational purposes only
- User responsibility to determine product suitability
- Cyberbond disclaims liability for consequential damages
Catalog excerpts
TECHNICAL DATA SHEET Apollo Z 574 is a single component, low to medium viscosity ethyl cyanoacrylate adhesive. It is specially formulated for bonding TPO and TPV rubber compounds. Apollo Z 574 is additionally suitable for rubber to metal bonding. Physical Properties - Monomer (Uncured) Base Compound Appearance Modified Ethyl Clear Specific Gravity Flash Point Shelf Life Storage Condition Physical Properties - Polymer (Cured) Full Cure Time Hot Strength (%RT strength, tested at temperature) Service Temp Range Time Until Full Cure (% of RT strength) seconds seconds seconds Performance of Cured Adhesive N/mm² Heat Aging (aged at temp indicated and tested @ 22°C) *Rubber figures given are typical. Your results may vary by specific rubber type. **Tested to ASTM 4501 Performance Range, by Substrate 0.0 Rubber (typical)
Open the catalog to page 1
Solvent Resistance Example Ethanol, Methanol Ethylacetate Acetone, Benzophenone Petrol, Heptanes, Hexane Aromatic hydrocarbons Benzyl, Toluol, Xylol Halogenated hydrocarbons Methylenchloride, Chloroform, Chlorobenzol Weak aqueous acid Nitrite, muriatic acid, + + + (– – – if sulphuric acid, phosphoric concentrated) acid Solvent Alcohol Ester (aromatic) Ketone (aromatic) Aliphatic hydrocarbon (alkanes) Weak aqueous base sodium hydroxide solution, caustic potash General Instructions Surfaces to be bonded should be clean and dry. Dispense a drop or drops to one surface only. Apply only enough to...
Open the catalog to page 2All Cyberbond catalogs and technical brochures
Boost 60701 Page
UNDO 60202 Pages
Blast 60031 Page
Blast 60021 Page
Cybercryl 8051 Page
Cybercryl 8001 Page
Cyberpoxy 58991 Page
Cyberpoxy 58951 Page
Titan 75672 Pages
Titan 75692 Pages
Titan 76092 Pages
Titan 76202 Pages
Titan Primer-N2 Pages
Cyberlite U3232 Pages
Cyberlite U3342 Pages
Cyberlite U3432 Pages
Cyberlite U3502 Pages
Cyberlite U3562 Pages
Apollo 29992 Pages
Apollo H22 Pages
Apollo H72 Pages
Apollo Z-3962 Pages
Apollo 20032 Pages
Apollo 16032 Pages
Titan 76802 Pages
Titan 81112 Pages
Titan 82222 Pages
Titan 82422 Pages
Titan Primer N2 Pages
Apollo H-42 Pages
Titan 74902 Pages
Apollo 20022 Pages
Photobond 43022 Pages
Dualbond 7072 Pages
Katiobond 45522 Pages
Titan 72222 Pages
Cybercryl 10941 Page
Blast 60011 Page
Apollo 20002 Pages
Archived catalogs
Boost 60102 Pages
Cyberpoxy 18952 Pages
- Single-component adhesive
- Metal adhesive
- Industrial adhesive
- Plastic adhesive
- Glass adhesive
- Dispersion adhesive
- Two-component adhesive
- Primer
- Fast curing adhesive
- Viscosity adhesive
- Wood adhesive
- Rubber adhesive
- Shear strength adhesive
- Low-viscosity adhesive
- Acrylic primer
- Methacrylate adhesive
- Sealing sealant
- High-viscosity adhesive
- Anaerobic adhesive