*mydirectindustry

Catalogs
Cyberbond
Apollo H-4

Apollo H-4

Product catalog summary

Product Description: Apollo H-4 is a fast-setting, low to medium viscosity cyanoacrylate adhesive suitable for various substrates, including wood, leather, and fiberglass mat. It is designed for rapid adhesion and filling small gaps.

Physical Properties: The adhesive is a colorless liquid with a viscosity of 100 cP at 68°F and a specific gravity of 1.06. It has a flash point of 185°F and a shelf life of one year when stored at 40°F.

Military Specifications: Complies with Mil-A-46050C, Type II, Class 2.

Curing Properties: Curing begins with ambient moisture, reaching handling strength quickly. Full cure and resistance develop over 24 hours. Setting times vary by substrate, e.g., steel (8-12 seconds), aluminum (8-14 seconds), and pine (2-5 seconds).

Curing Performance: Smaller bond gaps increase set speed. Activators can enhance speed but may reduce adhesive performance.

Polymer (Cured) Properties: The cured adhesive is a colorless solid with a service temperature range of -65°F to 200°F, a softening point of 329°F, and a tensile strength of 3200 psi for steel/steel bonds.

Performance of Cured Materials: Tensile shear strength varies by substrate, e.g., blasted steel (18-26 N/mm²) and etched aluminum (11-18 N/mm²).

Temperature Resistance: Shear strength on steel retains significant strength across a range of temperatures.

Chemical Resistance: The adhesive retains strength after exposure to various solvents, e.g., gasoline (100%) and motor oil (90%), but not to 10% NaOH, 10% HCl, or water.

General Instructions: Surfaces should be clean and dry. Apply a thin film and press parts together for a few seconds. Maximum strength is achieved in 24 hours. Store products in a cool, dry place, and bring to room temperature before use.

Note: The data provided is for reference only. Users should determine the product's suitability for their specific applications and take necessary precautions. Cyberbond L.L.C. disclaims all warranties and liabilities for consequential damages.

Catalog excerpts

Sheer strength on steel after 12 month soak % Strength Retained Solvent Motor Oil 90 Gasoline 100 Tricloroethane 100 Freon TA 100 10% NaOH 0 10% Hcl 0 Water 0 The data contained herein are furnished for information only and are believed to be reliable. Cyberbond L.L.C. cannot assume responsibility for the results obtained by others over whose method Cyberbond L.L.C. does not control. It is the users responsibility to determine suitability for the product or of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons...

Open the catalog to page 2

All Cyberbond catalogs and technical brochures

Archived catalogs

Boost 6010
2 Pages
Cyberpoxy 1895
2 Pages