TECHNICAL DATA SHEET Apollo 2999 is a single component, high viscosity gel cyanoacrylate adhesive. It is ideal for bonding porous materials, or for applications where controlling adhesive flow is critical. Apollo 2999 offers maximum gap filling and repositioning time. Apollo 2999 has been certified to ISO 10993-5 for cytotoxicity, making it appropriate for use in medical device applications. Physical Properties - Monomer (Uncured) Base Compound Specific Gravity Flash Point Shelf Life Storage Condition Physical Properties - Polymer (Cured) Full Cure Time Service Temp Range (%RT strength, tested at temperature) Time Until Full Cure seconds seconds seconds Performance of Cured Adhesive N/mm² Heat Aging (aged at temp indicated and tested @ 22°C) *Rubber figures given are typical. Your results may vary by specific rubber type. **Tested to ASTM 4501 Performance Range, by Substrate 0.0

Solvent Resistance Example Ethanol, Methanol Ethylacetate Acetone, Benzophenone Petrol, Heptanes, Hexane Aromatic hydrocarbons Benzyl, Toluol, Xylol Halogenated hydrocarbons Methylenchloride, Chloroform, Chlorobenzol Weak aqueous acid Nitrite, muriatic acid, sulphuric acid, phosphoric acid sodium hydroxide solution, caustic potash Solvent Alcohol Ester (aromatic) Ketone (aromatic) Aliphatic hydrocarbon (alkanes) Weak aqueous base General Instructions Surfaces to be bonded should be clean and dry. Dispense a drop or drops to one surface only. Apply only enough to leave a thin film layer after...