MATERIAL SAFETY DATA SHEET Cyberbond LLC 401 N Raddant Road, Batavia, IL 60510 630.761.8900 tel 630.761.8989 fax www.cyberbond1.com 1 - Chemical Product and Company Identification Product Name Date Revised Product Type Emergency Number 2 - Composition/Information on Ingredients CAS Number Hazardous Component Ethyl-2 Cyanoacrylate Poly Methyl Methacrylate Exposure Limits (TWA) 3 - Hazards Identification Potential Health Effects Inhalation: Exposure to vapors above the established exposure limit results in respiratory irritation which may lead to difficulty breathing and tightness in the chest. Skin Contact: Bonds to skin in seconds. May cause skin irritation. Cyanoacrylates have been reported to cause allergic reaction but due to rapid polymerization at the skin surface, an allergic response is rare. Cyanoacrylates generate heat during the cure process and in rare instances a large drop can burn the skin. Irritating to eyes. Can cause excessive tearing. Eyelids may bond. Material is not harmful if ingested. 4 - First Aid Measures Inhalation: Skin Contact: Eye Contact: Ingestion: Remove to fresh air. If symptoms persist, obtain medical attention. Soak in warm water. Do not pull skin apart. See supplemental section for emergency action. Flush with warm water. If eyelids are bonded closed, release eyelashes with water by covering the eye with a wet pad. Do not force eye open. See supplemental section for emergency action. Ingestion is unlikely. See supplemental section for emergency action. 5 - Fire Fighting Measures Flash Point: Extinguishing Media: 87°C, 189°F Tag Closed Cup Foam, Dry Chemical or Carbon Dioxide Unusual Fire or Explosion Hazards: Special Fire Fighting Procedures: Wear self-contained breathing apparatus Hazardous Combustion Products: Trace amounts of toxic and/or irritating fumes may be released and the use of breathing apparatus is recommended. 6 - Accidental Release Measures Steps to be taken in case of spill or leak: Do not use cloths for clean-up. Flood spilled material with water to polymerize. Cured material can be scraped up and disposed of as non-hazardous waste. Make sure spill area is well ventilated.

7 - Handling and Storage Safe Storage: Store away from heat and direct sunlight to maximize shelf life. Store inside in a dry location. Keep container tightly closed. Avoid contact with skin, eyes, and clothing. Avoid breathing vapor or mist. Avoid contact with paper goods or fabric. Contact with these materials may cause rapid polymerization which can generate smoke and strong irritating vapors. 8 - Protective Equipment Local exhaust ventilation is recommended to maintain vapor level below exposure limits. Observe OSHA regulations for respiratory use (29 CFR 1910.134) Use NIOSH approved respirator...

15 - Regulatory Information TSCA 8b Inventory status: All components are listed or exempt Immediate health hazard, Delayed health hazard, Fire, Reactive Canada DSL/NDSL: WHMIS hazard class: All components are listed or exempt B.3, D.2.B 16 - Other Information Hazard: NFPA Hazard Code HMIS Hazard Code 2 2 1 Personal protection: See Section 8 Health: Fire: Physical Hazard: Specific Hazard: First Aid Supplement Cyanoacrylate adhesive is a very fast setting and strong adhesive. It bonds human tissue and skin in seconds. Experience has shown that accidents due to Cyanoacrylates are best handled by...